ENGLISH

INSTRUCTIONS FOR USE

DESCRIPTION

Description of the control area (See Fig. D)

1.Meter and control panel

2.Indicator light panel

3.Lifted hopper warning light (red)

4.High beam indicator light

5.Running light indicator light

6.Turn signal indicator light

7.Charged battery indicator light

8.Engine oil pressure warning light

9.Engine coolant high temperature warning light

10.Low fuel warning light

11.Glow plug pre-heating warning light

12.Parking brake warning light

13.Clogged engine air filter warning light

14.Water-in-fuel warning light

15.Fuel level indicator

16.Engine coolant temperature indicator

17.Display showing:

Working hours (when the ignition key is turned on the first position, before running the engine)

Engine speed (when the engine is running and the charged battery warning light is off)

The display can also show the following acronyms:

F.OPE: it indicates that the fuel level indicator cable is not connected

F.COr: it indicates that the fuel level indicator cable is shorted

H.OPE: it indicates that the engine coolant temperature indicator is not connected

H.COr: it indicates that the engine coolant temperature indicator is shorted

18.Left vent

19.Ceiling light: If pressed on the right or left side, it turns on. In central position, it turns off.

20.Hazard warning light switch

21.Hopper lid opening/closing switch

22.3rd broom tilting switch

23.Right vent

24.Ignition key

25.3rd broom rotation direction selector

26.Drive pedal

27.Dust control system water pump switch:

When the switch is turned to the first position, the nozzles sprinkle a medium quantity of water

When the switch is turned to the second position, the nozzles sprinkle the maximum quantity of water

28.Steering wheel

29.Side brooms (first position) and 3rd broom (second position) switch

30.Suction fan/optional equipment switch

31.Brake pedal

32.Windscreen wiper fluid tank

33.Windscreen wiper switch

In 0 position: windscreen wiper stopped

In 1 position: windscreen wiper moving

In 2 position (with spring-return): windscreen washer jet

34.3rd broom arm extension shifting switch (with spring- return)

35.Combination switch, having the following functions:

Headlights off, with mark (35b) at the symbol O

Running lights on, with mark (35b) at the symbol

Low beam on, with mark (35b) at the symbol

High beam on, with mark (35b) at the symbol and lowered lever (35a)

High beam temporary on, lifting the lever (35a)

Right turn signal on, bringing the lever (35a) forward

Left turn signal on, bringing the lever (35a) backward

Horn activation, pushing the lever (35a) in the direction shown by the arrow (35c)

36.Suction inlet, brooms, hopper joystick

37.Suction inlet and side broom lowering push-button

38.Suction inlet and side broom lifting push-button

39.Hopper return push-button

40.Hopper dumping push-button

41.Suction inlet and side broom left shifting push-button

42.Suction inlet and side broom right shifting push-button

43.Hopper lifting push-button

44.Hopper lowering push-button

45.Safety push-button (press and hold it to activate the other push-buttons on the joystick)

46.3rd broom joystick, to activate the following functions (after pressing the 3rd broom switch):

Forward: 3rd broom lowering

Backward: 3rd broom lifting

Right side: arm to the right side

Left side: arm to the left side

47.Skirt lifting push-button

48.Skirt lowering push-button

49.Full water tanks warning light (green)

50.Full water sub-tank warning light (yellow)

51.Empty water tanks warning light (red) (the pumps stop automatically)

52.3rd broom working light switch

53.Closed hopper lid warning light

54.Warning decal

8

33015124(3)2008-02

RS 1300

Page 30
Image 30
Nilfisk-Advance America RS 1300 manual Description of the control area See Fig. D