Nx Networks NX series user manual 6586, Functions in the System menu

7

				Control keypad				65(86)
Functions in the System menu
	Code	Function	Min	Max	Unit	Default	Cust	Selections
								Basic Application
								Standard Application
						Basic		Local/Remote control Appl.
	S6.1	Application selection						Multi-Step Application
						Application		PID Control Application
								Multi-Purpose Control Appl.
								Pump and Fan Control
								Appl.
								English
	S6.2	Language selection				English		Deutsch
								Suomi
								Svenska
								Italiano
	S6.3.1	Password				Not used		0=Not used
	P6.3.2	Parameter lock				Change		Change Enabled
						Enabled		Change Disabled
	P6.3.3	Internal brake				Connected		Not connected
		resistor						Connected
	P6.3.4	Fan control				Continuous		Continuous
								Temperature
	P6.3.5	Multimonitoring page				Change		Change enabled
						enabled		Change disabled
	P6.3.6	HMI acknowledg.	200	5000	ms	200
		timeout
	P6.3.7	HMI number of	1	10		5
		retries
	P6.4.1	Default page
	P6.4.2	Default page/
		Operating menu
	P6.4.3	Timeout time	0	65535	s	30
	P6.4.4	Contrast	0	31		18
	P6.4.5	Backlight time	Always	65535	min	10
	S6.5.1	Load up to keypad						All parameters
	S6.5.2	Load down from						All parameters
		keypad						Application parameters
								Store set 1
	S6.5.3	Parameter sets						Load set 1
								Store set 2
								Load set 2
								Load factory defaults
	P6.5.4	Parameter backup				No		Yes
								No
	S6.6	Parameter
		comparison
	I6.7.1	Info: Unit power
	I6.7.2	Info: Unit voltage			V
	I6.7.3	Info:
		Software version
	I6.7.4	Info:
		Firmware interface
	S6.7.5	Info:
		Expander boards
	D6.7.6.1.1	Info: Applications:
		Application ID
	D6.7.6.1.2	Info: Applications:
		Version