7
Control keypad | 79(86) |
7.3.7Expander board menu (M7)
The Expander board menu makes it possible for the user 1) to see what expander boards are connected to the control board and 2) to reach and edit the parameters associated with the expander board.
Enter the following menu level (G#) with the right arrow menu button At this level, the user can browse through slots (see page 40) A to E with the Browser buttons to see what expander boards are connected. The lowermost line of the display shows the number of parameters associated with the board. It is possible to view and edit the parameter values in the same way as described in chapter 7.3.2. See Table
Expander board parameters
| Code | Parameter | Min | Max |
| Default | Cust | Selections |
|
|
|
|
|
|
|
| 1=0…20 mA |
|
|
|
|
|
|
|
| 2=4…20 mA |
| P7.1.1.1 | AI1 mode | 1 | 5 | 3 |
| 3=0…10 V | |
|
|
|
|
|
|
|
| 4=2…10 V |
|
|
|
|
|
|
|
| |
| P7.1.1.2 | AI2 mode | 1 | 5 | 1 |
| See P7.1.1.1 | |
|
|
|
|
|
|
|
| 1=0…20 mA |
| P7.1.1.3 | AO1 mode | 1 | 4 |
| 1 |
| 2=4…20 mA |
|
|
| 3=0…10 V | |||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 4=2…10 V |
|
|
|
|
|
|
|
|
|
Table
| R EA DY |
| R EA DY |
| I/Oterm |
| I/Oterm |
| D:NXOPTC2 | Monitor | |
| G1"G2 |
| V1"V2 |
READY | READY |
| READY |
I/Oterm | I/Oter m |
| I/Oterm |
Expander boards | C:NXOPTC1 | Parameters | |
G1"G5 | G1"G2 |
| P1"P4 |
READY | READY |
|
|
I/Oterm | I/Oter m |
| CHANGE VALUE |
|
|
| |
Slave address | Slave address |
| CONFIRM CHANGE |
126 | 126 | enter | |
|
| ||
R EA DY |
|
|
|
I/Oterm |
|
|
|
Baud rate |
|
|
|
Auto |
|
|
|
