7
62(86) | Control keypad |
7.3.4.3Fault time data record
When a fault occurs the information described above in 7.3.4 is displayed. By pushing the right arrow menu button it is possible to view the Fault time data record menu indicated by T.1#T.13. In this menu, some selected important data valid at the time of the fault are recorded. This feature is intended to help the user or the service person to determine the cause of fault.
The data available are:
| T.1 | Counted operation days | d |
| (Fault 43: Additional code) |
| |
|
|
| |
| T.2 | Counted operation hours | hh:mm:ss |
| (Fault 43: Counted operation days) | (d) | |
|
| ||
| T.3 | Output frequency | Hz |
| (Fault 43: Counted operation hours) | (hh:mm:ss) | |
|
| ||
| T.1 | Counted operation days | d |
| T.2 | Counted operation hours | hh:mm:ss |
| T.3 | Output frequency | Hz |
| T.4 | Motor current | A |
| T.5 | Motor voltage | V |
| T.6 | Motor power | % |
| T.7 | Motor torque | % |
| T.8 | DC voltage | V |
| T.9 | Unit temperature | ° C |
| T.10 | Run status |
|
| T.11 | Direction |
|
| T.12 | Warnings |
|
| T.13 |
| |
|
|
|
|
Table
