7
Control keypad | 67(86) |
7.3.6.1Application selection
The user can select the application desired by entering the Application selection page (S6.1). This is done by pushing the right arrow menu button when on the first page of the System menu. Change the application by pushing the right arrow menu button once again. The name of the application starts to blink. Browse through the applications with the Browser buttons and select another application with the Enter button.
In this phase, the display requests whether theparameters of the new application are to be uploaded to the keypad. If so press the Enter button Pushing any other button leaves the parameters of the previously used application saved in the keypad. For more information, see Chapter 7.3.6.5.
For more information about the Application Package, see the NX Application Manual.
STOP | READY |
| STOP | READY |
I/O term |
|
| I/O term |
|
System Menu |
| Application | ||
S1"S11 |
| Standard |
| |
STOP | READY |
| STOP | READY |
|
|
| ||
I/O term |
|
| I/O term |
|
|
|
|
| |
Application | enter | Application | ||
Standard |
|
|
| |
Figure 7-9. Change of application
7.3.6.2Language selection
The HMI control keypad offers the user the possibility to control the frequency converter through the keypad in the language of your choice.
Locate the language selection page under the System menu. Its location indication is S6.2. Press the right arrow menu button once to enter the edit mode. As the name of the language starts to blink choose another language for the keypad texts. Confirm the selection by pushing the Enter button The blinking stops and all textual information on the keypad is presented in the language chosen.
Return to the previous menu anytime by pushing the left arrow menu button.
