7
50(86) |
| Control keypad |
start | = | Start button. |
|
| Pressing this button starts the motor if the keypad is the active control |
|
| place. See Chapter 7.3.3.1. |
stop | = | Stop button. |
| Pressing this button stops the motor (unless disabled by parameter | |
|
| |
|
| R3.4/R3.6). |
7.3 Navigation on the control keypad
The data on the control keypad are arranged in menus and submenus. The menus are used for example for the display and editing of measurement and control signals, parameter settings (chapter 7.3.2), reference values and fault displays (chapter 7.3.4). Through the menus, the contrast of the display (page 73) can be adjusted.
Location
Description
Number of items available; Item value
STOP READY
Local
Monitor
V1"V14
The first menu level consists of menus M1 to M7 and is called the Main menu. The user can navigate in the main menu using the Browser buttons up and down. The desired submenu can be entered from the main menu using the Menu buttons. When there still are pages to enter under the currently displayed menu or page, an arrow (
) can be seen in the lower right corner of the display and by pressing the right arrow menu button, the next menu level can be reached.
The control keypad navigation chart is shown on the next page. Please note that the menu M1 is located in the lower left corner. From there it is possible to navigate your way up to the desired menu using the menu and browser buttons.
More detailed descriptions of the menus can be found later in this Chapter.
