7
Control keypad | 73(86) |
Contrast adjustment (P6.4.4)
In case the display is unclear adjust the contrast through the same procedure as that for the timeout time setting (see above).
Backlight time (P6.4.5)
Giving a value for the Backlight time, can determine how long the backlight stays on before going out. Select here any time between 1 and 65535 minutes or 'Forever'. For the value setting procedure see Timeout time (P6.4.3).
7.3.6.5Parameter copy
The parameter copy function is used when the operator wants to copy one or all parameter groups from one drive to another. All the parameter groups are first uploaded to the keypad, then the keypad is connected to another drive and then the parameter groups are downloaded to it (or possibly back to the same drive).
Before any parameters can successfully be copied from one drive to another the drive has to be stopped when the parameters are downloaded to it:
The parameter copy menu (S6.5) embodies two functions:
Upload parameters to keypad (To keypad, S6.5.1)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
Enter the To keypad page (S6.5.1) from the Parameter copy menu. Push the right arrow menu button to enter the edit mode. Use the Browser buttons to select the option All parameters and press the Enter button. Wait until 'OK' appears on the display.
READY | READY | READY |
|
|
I/Oter m | I/Oter m | I/Oterm | enter | CONFIRM |
|
|
|
| |
Copy Parameters | Up to keypad | Up to keypad |
|
|
P1"P4 | Select | All param. |
| CANCEL |
READY | READY |
|
|
|
I/Oterm | I/Oter m |
|
|
|
Up to keypad | Up to keypad |
|
|
|
Wait... | OK |
|
|
|
