Nx Networks NX series user manual 1286, Receipt of shipment, Type designation code, Storage

3

12(86) Receipt of shipment

3.RECEIPT OF SHIPMENT

The NX frequency converters have undergone rigorous tests and quality checks at the factory before delivery. However, after unpacking the product, check that no signs of transport damages are to be found on the product and that the delivery is complete (compare the type designation of the product to the code below, Figure 3-1.

Should the drive have been damaged during the shipping, contact the carrier and or distributor.

If the delivery does not correspond to your order, contact the supplier immediately.

3.1 Type designation code

NXS 0000 V 3 5 A 2 C 1

Brake chopper

0 = no brake chopper

1 = internal brake chopper

2 = internal brake chopper and resistor

EMC emission level:

H = fulfils standard IEC 61800-3 (Am 1 industrial level), 1st environment restricted distribution, 2nd environment

T= fulfils standard IEC 61800-3 (Am 1 commercial level) for IT networks C = fulfils standards EN50081-1, -2 and EN61800-3

Enclosure class:

0 = IP00, 2 = IP21 (Nema 1), 5 = IP54 (Nema 12)

Control panel:

A = standard (alpha-numeric)

B = neutral (no local control panel)

C = special (special switches, potentiometer etc.)

D = dummy panel

Voltage (3-phase):

2 = 208–240Vac, 5 = 380–500Vac, 6 = 525–690Vac (All 3-phase)

Phase:

1= 1-phase, 3 = 3-phase Voltage

Motor current (low overload)

0007 = 7 A, 0022 = 22 A, 0205 = 205 A etc.

Product series: NXS = standard, NXP = high-performance

Figure 3-1. NX type designation code

3.2 Storage

If the frequency converter is to be kept in store ensure that the ambient conditions are acceptable:

Storing temperature	–40…+70 ° C
Relative humidity	<95%, no condensation