nSerialReceive
Function: int nSERIALReceive (long session, short port, unsigned short flush, long timeout,
short terminator, short length, char FAR *data, short FAR *xlength, unsigned short
FAR *status);
Parameters:
Long session The session handle of the NetScan
Short port The port being read from.
Unsigned short flush Flag to indicate if the receive buffer should be
cleared.
long timeout The time, in milliseconds, to wait for received data.
Short terminator The terminator to be used for serial input.
Short length The maximum number of characters to be
Read into the data buffer.
Char FAR * data A buffer where the received characters will be
placed.
Short FAR * xlength The number of characters that were read.
Parameter Values:
Port NetScan = 1
Aux = 0
Flush retain = 0
Empty = 1
Terminator none = -1
CRLF = -3
User defined = 0 to 255
Returns: 0 if successful, error code or war ning if command not completed.
Description: This function’s primary use is to read data from the NetScan’s ethernet interface. The secondary use is
to flush all characters from the NetScan’s ethernet interface transmit buffer. Because this function may take some
time to complete, the return value must be tested to see if the command has completed. The return value for
command pending is –801.
Example:
Do { ErrVal = nSERIALReceive(session, 1, 0, 1000, 13, 100, &dataBuffer,
&xlength);
} while (errVal == -801);