NetScan User’s Manual General Inform at ion and Specifications 3-3
Software and Hardware
Software
ChartViewNET
PostView
ScanCal
CIMScan
(optional)
ScanServer
(optional)
16-Channel Signal Conditioning Cards (Optional)
Low-voltage with removable
terminal block input module
(CSN14/LV/T)
Low-voltage with BNC input
module
(CSN14/LV/B)
Low-voltage with safety jack
input module
(CSN14/LV/S)
Isolated TC/voltage with
plug type input module
(CSN14/TC/P)
Isolated high-voltage with
safety jack input module
(CSN14/HV/S)
Cables
CA-47, Computer-to-NetScan Cable
PC/AT/XT serial port (9- & 25-pin sub D) to NetScan (9-pin
sub D) RS-232/422 cable, 6 ft.
CA-192-5, 10-Base-T “straight-through” ethernet cable, 5ft.
CA-192-Adapter, 10-Base-T ethernet “cross-over” adapter
Additional Hardware Options
4-slot expansion chassis
Memory expansion options:
1 Mbyte, 4 Mbyte, or 8 Mbyte
16 output CSN/Relay card
NetScan Specifications
&$87,21
If equipment is used in any manner not specified in this manual, or if specification limits
are exceeded, the function of the equipment, as well as the protection provided by it,
may be impaired.
NOTE: Specifications for signal conditioning cards and for the NetScan Expansion Chassis appear in their
respective sections of this manual.
Measurement Parameters
A/D resolution
16 bit w/over sampling
Accuracy (with type J TC)
± 0.5°C
TCs supported
J,K,T,E,R,S,B,N
DCV
3
ACV
3
Ch-to-ch isolation
500 V or 200 V
Ch-to-system isolation
500 V
AC line rejection
3
Scanning Parameters
Switching Technology
mechanical relays
Max scan rate
147 chs. per sec.
Max single-ch scan rate
20 Khz