4-26 ChartView Software Reference NetScan Users Manual
Log Enable
(Ctrl+A) Once an alarm log file exists, log enable can be used to activate the logging process; or to disable an
active log. A check-mark ( ) precedi ng Log E nable indicates that the log is active. No check-mark
present indicates the alarm log has not been enabled.
Instrument Error
Status
Brings up the Device Error Status dialog box. This box lists existing error types, including invalid
command and channel configuration errors.
Instrument
Realtime Clock
Brings up the Device System Time dialog box. You can adjust the time and date set t i ngs from this
box.
Device Status Dialog Boxes
Device … Configuration A Device Expanded Menu (obtained with use of the F12 Key)
You can expand the Device pull-down menu by pressing the F12 function key (on your computer keyboard) prior to
pulling down the menu. After pressing F12, the pull-down menu will show a listing entitled Configuration. The
expanded-menu setting is not saved in the configuration file when exiting ChartView. If the expanded menu is
desired, you must press F12 each time you start ChartView. This expanded menu is t ypi c ally not used by the
operator. The Raw Thermocouple Input and Raw Temperature Sensor Input selections primarily exist as an aid in
troubleshooting by experienced technicians.