Onkyo TX-SR876 instruction manual 119, Lock Setup, See Network Settings on

Advanced Setup—Continued

Power Control

To link the power functions of -compatible components connected via HDMI, select “Enable”.

Disable: Power Control disabled.

Enable: Power Control enabled.

Notes:

•The “Power Control” setting can be set only when the above “Control” setting is set to “Enable”.

•HDMI power control only works with -com- patible components that support it and may not work properly with some components due to their settings or compatibility.

•When set to “Enable”, power consumption will increase.

•Refer to the connected component’s instruction man- ual for details.

TV Control

Set to “Enable” when you want to control the AV

receiver from an -compatible TV that is con- nected to HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:

•Set to “Disable” when the TV is not compatible or when it is unclear whether the TV is compatible or not.

•The “TV Control” setting can be set only when the above “Control” and “Power Control” settings are both set to “Enable”.

•Refer to the connected component’s instruction man- ual for details.

Note:

After changing the settings of the “Control”, “Power Control”, or “TV Control”, turn off the power to all connected pieces of equipment and then turn on again. Refer to the User’s Manuals for all connected pieces of equipment.

When linking to a TV that conforms to the CEC standard, the “Monitor Out” setting must be set to “HDMI Main”.

Network

See “Network Settings” on page 128.

Lock Setup

Lock

With this setting, you can protect your settings by lock- ing the setup menus.

Locked: Setup menus locked. Unlocked: Setup menus unlocked (default).

When Locked is selected, only this “Lock Setup” item can be accessed.

119