Onkyo TX-SR876 instruction manual Turning On the AV Receiver, Turning On and Standby

Turning On the AV Receiver

• North American model			• Other models
	ON/STANDBY			ON/STANDBY
		STANDBY indicator			STANDBY indicator

POWER

STANDBY
ON	STANDBY	TV
ON
			INPUT
DVD	VCR/DVR	CBL/SAT
1	2	3	+
GAME/TV	AUX1	AUX2	TV CH
4	5	6	-
TAPE	TUNER	CD
7	8	9
PHONO	NET/USB	D. TUN	TV VOL
+10	0	CLEAR
--/--- 10	11	12
INPUT SELECTOR
	MACRO
1	2	3	ZONE3
	REMOTE MODE
DVD	VCR	CD	ZONE2
RECEIVER		CDR/MD/DOCK
		NET/USB
TV	CABLE		RECEIVER
	SAT		TAPE/AMP
DIMMER			SLEEP

Turning On and Standby

1 Set the [POWER] switch to the ON position ( ).

(Skip this step if you have the North American model.)

The AV receiver enters Standby mode, and the STANDBY indicator comes on.

2

	Remote
AV receiver	controller

or

On the AV receiver, press the [ON/STANDBY] button.

On the remote controller, press the [RECEIVER] REMOTE MODE button, followed by the [ON] button.

The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.

Pressing the remote controller’s [ON] button again will turn on any components con- nected via u.

To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller’s [STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises the next time you turn on the AV receiver, turn down the volume before you turn it off.

For non-North American models: To completely shut down the AV receiver, set the [POWER] switch to the OFF position ().

Up and Running in a Few Easy Steps

To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once.

■ Do the automatic speaker setup—this is essential!

See “Automatic Speaker Setup (Audyssey MultEQ® XT)” on page 64.

■Did you connect your TV to an HDMI OUT or COMPONENT

VIDEO MONITOR OUT?

If you did, see “Monitor Out Setup” on page 55.

■Did you connect a component to an HDMI input, component video input, or digital audio input?

If you did, see “Video Input Setup” on page 56, “Component Video Setup” on page 58, or “Digital Audio Input Setup” on page 59 respectively.

■Did you connect an Onkyo MD recorder, CD recorder, or RI Dock?

If you did, see “Changing the Input Display” on page 63.

Y

HDMI

PB COAXIAL

PR OPTICAL

OUT IN

TAPE	MD recorder, CD recorder,
	RI Dock

51