Onkyo TX-SR876 instruction manual 132, Powered Zone2 Setting, Tons to select 2. Zone2/Zone3

Zone 2 and Zone 3—Continued

Powered Zone2 Setting

If you’ve connected your Zone 2 speakers to the AV receiver, as explained in “Connecting Your Zone 2 Speakers Directly to the AV receiver” on page 130, you must set the “Powered Zone2” setting to “Act” (Acti- vated).

	ON	STANDBY						TV
									INPUT
	DVD	VCR/DVR			CBL/SAT
	1		2			3			+
	GAME/TV	AUX1			AUX2				TV CH
	4		5			6			-
	TAPE	TUNER			CD
	7		8			9
	PHONO	NET/USB			D. TUN				TV VOL
	+10		0		CLEAR
	--/--- 10			11				12
	INPUT SELECTOR
		MACRO
	1		2			3			ZONE3
		REMOTE MODE
	DVD	VCR			CD				ZONE2
					CDR/MD/DOCK					RECEIVER
	TV	CABLE			NET/USB				RECEIVER
		SAT							TAPE/AMP
	DIMMER								SLEEP
				ENU	M	EN
		M					U
		OP
		T
ENTER	+
	CH			ENTER					VOL
	DISC
	ALBUM
	-	G
SETUP				UIDE	IT
	CH				EX
		ETUP			RETU
	PREV	S						N
						R
	DISPLAY								MUTING
	REC			PLAYLIST					RANDOM
		SP A				SP B

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [ENTER]. The “Hardware Setup” menu appears.

3	Use the Up and Down [q]/[w] but-
	tons to select “2. Zone2/Zone3”,
	and then press [ENTER].
	The “Zone2/Zone3” screen appears.
	7-2. Zone2/Zone3
	Powered Zone2	Not Act
	Zone2 Out	Fixed
	Zone3 Out	Fixed

MOVE VALUE RETURN RETURN SETUP EXIT

4 Use the Up and Down [q]/[w] but- tons to select “Powered Zone2”, and use the Left and Right [e]/[r] buttons to select:

Not Act: ZONE 2 L/R speaker termi- nals not activated (Powered Zone 2 disabled).

Act: ZONE 2 L/R speaker termi- nals activated (Powered Zone 2 enabled).

5	Press the [SETUP] button.
	Setup closes.

Notes:

•When “Act” is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker terminals output sound, but the surround back speakers connected to the SURR BACK L/R speaker terminals do not. When “Act” is selected and Zone 2 turned off, the surround back speakers output sound as normal.

•Powered Zone 2 cannot be used if “Speaker Type: Front(Speaker A)” is set to “Bi-Amp” or “BTL”, or “Speaker Type: Front(Speaker B)” is set to “Normal”, “Bi-Amp”, or “BTL” (page 61).

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

132