Onkyo TX-SR876 instruction manual 110, Name Edit, IntelliVolume, Sync, To correct a character

Advanced Setup—Continued

5 Use the Up and Down [q]/[w] but- tons to select an option, and use the Left and Right [e]/[r] but- tons to change it.

The “Source Setup” menu items are explained below.

6	When you’ve finished, press the
	[SETUP] button.

Name Edit

You can enter a custom name for each individual input selector and radio preset for easy identification. When entered, the custom name will appear on the display.

The custom name is edited using the character input screen.

1.Use the arrow [q]/[w]/[e]/[r] buttons to select a character, and then press [ENTER].

Repeat this step to enter up to 10 characters.

2.When you’ve finished, to store a name, be sure to use the arrow [q]/[w]/[e]/[r] buttons to select “OK”, and then press [ENTER]. Otherwise it will not be saved.

Name input area

Setup closes.

IntelliVolume

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others.

4-3. Name Edit
Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
DISPLAY	ENTER INPUT RETURN RETURN SETUP EXIT

4-3. Name Edit
Name
0 1 2 3 4 5 6 7 8 9 - . '
( ) + * = / , : ; ! ? _
	OK CANCEL
DISPLAY	ENTER INPUT RETURN RETURN SETUP EXIT

Use the Left and Right [e]/[r] buttons to set the level.

If a component is noticeably louder than the others, use the Left [e] button to reduce its input level. If it’s notice- ably quieter, use the Right [r] button to increase its input level. The input level can be adjusted from –12 dB to +12 dB in 1 dB steps.

Note:

IntelliVolume does not apply for Zone 2 or Zone 3.

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the “A/V Sync” setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 250 milliseconds (msec) in 5 millisecond steps.

(Left)/ (Right):

Selected when the cursor is moved within the Name input area.

OK:

Selects when the entry is complete.

CANCEL:

Selects when you want to cancel the name entry.

To correct a character:

1.	Use the arrow [q]/[w]/[e]/[r] buttons to select
	“ ”(Left) or “ ”(Right) and then press [ENTER].
2.	Press [ENTER] several times to select the incorrect
	character (The cursor moves one letter each time
	[ENTER] is pressed).
3.	Use the arrow [q]/[w]/[e]/[r] buttons to select the

Use the Up and Down [q]/[w] buttons to select an input selector, and use the Left and Right [e]/[r] buttons to set the delay.

To view the TV picture while setting the delay, press [ENTER].

4–2.	A/V Sync
		DVD
A/V Sync				100msec
	Press Enter to see picture.
	VALUE			RETURN		EXIT
			RETURN		SETUP

correct character, and then press [ENTER].

Notes:

• To name a radio preset, use the [TUNER] button to

select AM or FM, and then select the preset (see step

1 on page 109).

• You cannot enter a custom name for XM or SIRIUS

radio presets.

• To restore a custom name to the default, erase the cus-

If HDMI Lip Sync is enabled (see page 118), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses.

Note:

A/V Sync cannot be set when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an analog input source.

tom name by entering an empty white space for each

letter.

• This procedure can also be performed on the AV

receiver by using its [SETUP], [ENTER], and arrow

buttons.

110