Onkyo TX-SR876 instruction manual 117, Hardware Setup, Remote Control, Zone2/Zone3

Advanced Setup—Continued

Hardware Setup

This section explains items on the Hardware menu.

										Remote
										indicator
	ON	STANDBY						TV
										INPUT
Number									INPUT
	DVD	VCR/DVR			CBL/SAT				+
buttons	1		2			3
	GAME/TV	AUX1			AUX2				TV CH
	4		5			6			-
	TAPE	TUNER			CD
	7		8			9
	PHONO	NET/USB			D. TUN				TV VOL
	+10		0		CLEAR
	--/--- 10			11				12
	INPUT SELECTOR
		MACRO
	1		2			3			ZONE3
		REMOTE MODE
	DVD	VCR			CD				ZONE2
					CDR/MD/DOCK					RECEIVER
	TV	SAT			NET/USB				TAPE/AMP
		CABLE							RECEIVER
	DIMMER								SLEEP
				ENU	M	EN
			M				U
		OP
		T
ENTER	+
	CH
				ENTER					VOL
	DISC
	ALBUM
	-		G
				UIDE	IT
SETUP	CH				EX
			TUP		RETU
	PREV	SE						N
						R
	DISPLAY								MUTING
	REC			PLAYLIST					RANDOM

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.
	The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [ENTER]. The “Hardware Setup” menu appears.

7.Hardware Setup

1.Remote Control

2.Zone2/Zone3

3.Tuner

4.Analog Multich

	5.	HDMI
	6.	Network
		MOVE	ENTER ENTER RETURN RETURN SETUP EXIT
3	Use the Up and Down [q]/[w] but-

tons to select an item, and then press [ENTER].

The screen for that item appears.

4 Use the Up and Down [q]/[w] but- tons to select an item, and use the Left and Right [e]/[r] but- tons to change it.

The items are explained below.

5	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Remote Control

■Remote ID

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differenti- ate the AV receiver from the other components, you can change its remote ID from 1, the default, to 2 or 3.

Note:

If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the Remote Controller’s ID

1	While holding down the
	[RECEIVER] REMOTE MODE but-
	ton, press the TV [INPUT] button.
	The Remote indicator flashes four
	times.

2	Use the number buttons to enter
	ID 1, 2, or 3.
	The Remote indicator flashes twice.

Zone2/Zone3

See “Zone 2 and Zone 3” on page 130.

117