Onkyo TX-SR876 instruction manual Front & Rear Panels, Front Panel

Front & Rear Panels

Front Panel

1 2 3 4 5 6 7 8

9 bk bl Front flap TX-NR906 only Push here to open

the flap

The actual front panel has various logos printed on it. They are not shown here for clarity.

The page numbers in parentheses show where you can find the main explanation for each item.

aON/STANDBY button (51)

Sets the AV receiver to On or Standby.

bSTANDBY indicator (51)

Lights up when the AV receiver is on Standby and flashes while a signal is being received from the remote controller.

cZONE 2 indicator (134)

This indicator lights up when Zone 2 is selected.

dZONE 3 indicator (134)

This indicator lights up when Zone 3 is selected.

eRemote-control sensor (15)

Receives control signals from the remote controller.

fDisplay

See “Display” on page 11.

gDISPLAY button (72)

iPURE AUDIO button and indicator (81)

Selects the Pure Audio listening mode. The indica- tor lights up when this mode is selected. Pressing this button again selects the previous listening mode.

jAUDIO SEL button (120)

Selects the audio input: analog, digital, HDMI, or multichannel.

kInput selector buttons (70)

Select the following input sources: DVD, VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2, TAPE, TUNER, CD, PHONO, NET/USB (TX-NR906 only).

Displays various information about the currently selected input source.

hMASTER VOLUME control (70) and indicator

Sets the volume of the AV receiver to −∞ dB, –81.5 dB through +18.0 dB (relative display).

The volume level can also be displayed as an abso- lute value. See “Volume Setup” on page 115.

9