Onkyo TX-SR876 instruction manual Audio Connection Formats, Monitor Out Setting Set to Analog

Connecting the AV Receiver—Continued

■“Monitor Out” Setting Set to

“Analog”

With the “Monitor Out” setting set to “Analog” (see page 52), video input signals flow through the AV receiver as shown, with composite video and S-Video sources being upconverted for the component video output. Use this set-

ting if you connect the AV receiver’s COM- PONENT VIDEO MONITOR OUT to your TV.

Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs.

The composite video, S-Video, and component video outputs pass through their respective input signals as they are.

Video Signal Flow Chart DVD player, etc.

Composite

AV receiver

Composite

TV, projector, etc.

S-Video Component HDMI

IN

MONITOR OUT

S-Video Component HDMI

This signal flow also applies when the Monitor

Out “Resolution” setting is set to “Through” (see page 55).

Video Signal Flow and the Resolution Setting

When the “Monitor Out” setting is set to “Ana- log” (see page 52), if the Monitor Out “Reso- lution” setting is set to anything other than “Through” (see page 55), the video signal flow will be as shown here, with composite video and S-Video sources being upconverted for the component video output.

The composite video, S-Video, and component video outputs pass through their respective analog input signals as they are. HDMI input signals are not output.

Video Signal Flow Chart DVD player, etc.

Composite

AV receiver

Composite

S-VideoComponent HDMI

IN

MONITOR OUT

S-Video Component HDMI

TV, projector, etc.

Audio Connection Formats

Audio equipment can be connected to the AV receiver by using any of the following audio connection formats: analog, optical, coaxial, analog multichannel, or HDMI.

When choosing a connection format, bear in mind that the AV receiver does not convert dig- ital input signals for analog line outputs and

Audio Signal Flow Chart

DVD player, etc.

Analog Multichannel Optical Coaxial HDMI

vice versa. For example, audio signals con- nected to an optical or coaxial digital input are not output by the analog TAPE OUT.

AV receiver

MD recorder, etc.

*2

Analog	Optical	HDMI
			*1

*1 Depends on the “Audio TV Out” setting (see page 118). *2 Only the front L/R channels are output.

35