Onkyo TX-SR876 instruction manual Digital Audio Input Setup, Tons to select 1. Input/Output

First Time Setup—Continued

Digital Audio Input Setup

If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to OPTICAL IN 2, you must assign OPTICAL IN 2 to the “CD” input selector.

Here are the default assignments.

Input selector	Default assignment
DVD	COAX1
VCR/DVR	COAX2
CBL/SAT	COAX3
GAME/TV	OPT1
AUX1	- - -
AUX2	FRONT (Fixed)
TAPE	- - -
TUNER	- - - (Fixed)
CD	OPT2
PHONO	- - -

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [q]/[w] but-
	tons to select “1. Input/Output

Assign”, and then press [ENTER].

The “Input/Output Assign” menu appears.

1. Input/Output Assign

1. Monitor Out

2. HDMI Input

3.Component Video Input

4.Digital Audio Input

5.Analog Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “4. Digital Audio
	Input”, and then press [ENTER].
	The “Digital Audio Input” menu
	appears.
	1–4.	Digital Audio Input
	DVD		COAX1
	VCR/DVR		COAX2
	CBL/SAT		COAX3
	GAME/TV		OPT1
	AUX		- - -
	AUX2		FRONT
	TAPE		- - -
	TUNER		- - -
	CD		OPT2
	PHONO		- - -
	MOVE	VALUE	RETURN RETURN SETUP EXIT

4 Use the Up and Down [q]/[w] but- tons to select an input selector, and then use the Left and Right

[e]/[r] buttons to select: “COAX1”, “COAX2”, “COAX3”, “OPT1”, “OPT2”, or “- - - (ana- log)”.

• When an HDMI IN is assigned to an input selector in “HDMI Input Setup” on page 56, this input assign- ment is automatically set to the same HDMI IN. And in addition to the usual inputs (e.g., COAX1, COAX2, etc.), you can also select HDMI inputs. If you change the input assignment from an HDMI IN to one of the other inputs (e.g., COAX1 or COAX2), be sure to set the “Using the DIGITAL INPUT Button” on page 64 to the same input (e.g., COAX1 or COAX2).

• “AUX2” is used only for digital input from the front panel terminals. When HDMI IN is assigned to “AUX2” in the “HDMI Input Setup” on page 56, the same HDMI IN can be selected.

	Examples:
	If you connect your DVD player to the
	OPTICAL IN 1 jack, set “DVD” to
	“OPT1”.
	If you want to listen to audio from the
	component connected to the OPTICAL
	IN 2 jack when the VCR/DVR input
	selector is selected, set “VCR/DVR” to
	“OPT2”.
	If you want to listen to audio from the
	component connected to the COAX-
	IAL IN 1 jack when the CBL/SAT
	input selector is selected, set
	“CBL/SAT” to “COAX1”.
	For input selectors that you don’t want
	to assign a digital input jack, set to
	“- - - (analog)”.
5	Press the [SETUP] button.
	Setup closes.

Notes:

•Only FRONT can be assigned to the AUX 2 input selector.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

59