Onkyo TX-SR876 135, Muting Zones, Zone 2 or Zone 3 button, Button repeatedly to select

Zone 2 and Zone 3—Continued

Adjusting the Volume of Zones

Adjusting the Tone and Balance of Zones

1

Remote

controller

AV receiver

On the remote controller, press the [ZONE2] or [ZONE3] REMOTE MODE button.

On the AV receiver, press the [ZONE 2] or [ZONE 3] button.

The ZONE 2 or ZONE 3 indicator flashes.

1	On the AV receiver, press the
	[ZONE 2] or [ZONE 3] button.
	AV receiver

2	Press the AV receiver’s [TONE]
	button repeatedly to select
	“Bass” “Treble” or “Balance”.

2

Remote

controller

AV receiver

On the remote controller, press the [LEVEL–] and [LEVEL+] but- ton.

On the AV receiver, press Up [r] and Down [e] button.

3 Use the Up [r] and Down [e]

buttons to adjust the Bass, Tre- ble or Balance.

• You can boost or cut the Bass or Tre- ble from –10 dB to +10 dB in 2 dB steps.

•You can adjust the balance from 0 in the center to +10 dB to the right or +10 dB to the left in 2 dB steps.

Notes:

Note:

Zones can also be unmuted by adjusting the volume.

Muting Zones

On the remote controller, press the [ZONE2] or [ZONE3] REMOTE MODE button, and then press the [MUTING] button.

To unmute a zone, on the remote controller, press the [ZONE2] or [ZONE3] REMOTE MODE button, and then press the [MUTING] but- ton again.

•The tone cannot be adjusted for Zone 3.

•The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the “Zone2 Out” setting is set to “Fixed” (page 133).

•The Zone 3 level and balance functions have no effect on the ZONE 3 PRE OUT when the “Zone3 Out” set- ting is set to “Fixed” (page 133).

135