Onkyo TX-SR876 120, Selecting Audio Inputs, Specifying the Digital Signal Format, Multich

Advanced Setup—Continued

Selecting Audio Inputs

REC	PLAYLIST		RANDOM
	SP A	SP B
	LISTENING MODE
STEREO	SURR
REPEAT	AUDIO	SUBTITLE	PLAY MODE
PURE A	DIRECT	THX	ALL ST
TEST TONE	CH SEL	LEVEL-	LEVEL+
OPEN/CLOSE	VIDEO OFF
AUDIO SEL	AUDIO SEL	L NIGHT	Re-EQ
	VCR	DVD	HDD

RC-687M

If you connect a component to more than one audio input, such as a DVD player connected to analog, digital, multichannel, and HDMI inputs, you can use the [AUDIO SEL] button to select which audio input you want to use to listen to that component.

Press the [AUDIO SEL] button repeatedly to select an audio input: HDMI > Auto > Multich > Analog.

HDMI:

Selects the assigned HDMI IN, and the HDMI indicator appears on the display. (The HDMI IN must already be assigned to the current input selector. See page 56.)

Auto:

Selects the assigned COAXIAL or OPTICAL DIGITAL IN, and the DIGITAL indicator appears on the display. (The DIGITAL IN must already be assigned to the current input selector. See page 59.) If there is no digital signal, the analog input is used instead.

Multich:

Selects the multichannel input, and the ANALOG indicator appears on the display. (The multichannel input must already be assigned to the cur- rent input selector. See page 60.)

Analog:

Selects the analog input, and the ANALOG indicator appears on the display.

Specifying the Digital Signal Format

1 2

Normally, the AV receiver detects the format of digital input signals automatically. However, if you experience either of the following issues when playing PCM or DTS sources, you can specify the signal format manually.

•If the beginnings of tracks from a PCM source are cut off, try the PCM setting.

•If noise is produced when fast forwarding or rewind- ing a DTS CD, try the DTS setting.

1Press the [AUDIO SEL] button repeatedly to select “Auto”.

2While “Auto” is shown on the

display, use the Left and Right [e]/[r] buttons to select:

PCM:

Only 2-channel PCM format input signals will be heard. If the input signal is not PCM, the PCM indica- tor will flash and noise may also be produced.

DTS:

Only DTS (but not DTS-HD) for- mat input signals will be heard. If the input signal is not DTS, the DTS indicator will flash and there will be no sound.

Auto (default):

The format is detected automati- cally. If no digital input signal is present, the analog input is used instead.

120