Onkyo TX-SR876 instruction manual Setting Speakers a and Speakers B TX-NR906 only

Advanced Setup—Continued

Setting Speakers A and Speakers B (TX-NR906 only)

These settings are not set automatically by the Auto- matic Speaker Setup function (see page 64).

If you’re using Speakers B, you can choose whether or not to use the subwoofer, center, surround, and surround back speakers with the Speakers A and Speakers B con- figurations independently. You cannot choose whether or not to use the front speakers.

Use the remote controller’s [SP A] or [SP B] button to select Speakers A or Speakers B, respectively.

13	Press the Down [w] button to dis-
	play the bottom half of the
	“Speaker Config” screen.
	2–2.	Speaker Config
	Subwoofer	Not Use	Speaker A
	Front	Use
	Center	Not Use
	Surround	Use
	SurrBack	Use
	MOVE	VALUE	RETURN RETURN SETUP EXIT

	Notes:
	•	The bottom half of the “Speaker
		Config” screen can only be displayed
		when the “Speaker Type:
		Front(Speaker B)” setting is set to
		something other than “Not Use”
		(page 61).
	•	You can switch between the Speak-
		ers A and Speakers B settings on
		either half of the “Speaker Config”
		screen.
14	Use the Up and Down [q]/[w] but-
	tons to select “Subwoofer”, and

then use the Left and Right [e]/[r] buttons to select:

Not Use: Select if you don’t want to use the subwoofer with Speakers A or Speakers B.

Use: Select if you do want to use the subwoofer with Speakers A or Speakers B.

Note:

Cannot be set if “Subwoofer” (step 5) is set to “No”.

15

16

17

Use the Up and Down [q]/[w] but- tons to select “Center”, and then use the Left and Right [e]/[r] buttons to select:

Not Use: Select if you don’t want to use the center speaker with Speakers A or Speakers B.

Use: Select if you do want to use the center speaker with Speakers A or Speakers B.

Note:

Cannot be set if the “Center” (step 7) is set to “None”.

Use the Up and Down [q]/[w] but- tons to select “Surround”, and then use the Left and Right [e]/[r] buttons to select:

Not Use: Select if you don’t want to use the surround speakers with Speakers A or Speakers B.

Use: Select if you do want to use the surround speakers with Speakers A or Speakers B.

Note:

Cannot be set if the “Center” (step 8) is set to “None”.

Use the Up and Down [q]/[w] but- tons to select “SurrBack”, and then use the Left and Right [e]/[r] buttons to select:

Not Use: Select if you don’t want to use the surr back speakers with Speakers A or Speakers B.

Use: Select if you do want to use the surr back speakers with Speakers A or Speakers B.

Note:

•Fixed at “Not Use” if “Surround” (step 16) is set to “Not Use”.

•Cannot be set if “Speaker Type: Front(Speaker B)” is set to “Bi-Amp” or “BTL” (page 61), “SurrBack” is set to “None” (step 9), or “Powered Zone2” is being used (page 132).

98