Onkyo TX-SR876 TV Format Setup Not North American models, Not Use, TV Format * setting is not

First Time Setup—Continued

6 Use the Up and Down [q]/[w] but- tons to select “Front(Speaker B)”, and use the Left and Right [e]/[r] buttons to select:

Not Use:

Select this if you’re not using

Speakers B.

Normal:

Select this if you’ve connected your front Speakers B normally.

Bi-Amp:

Select this if you’ve connected your front Speakers B for bi-amped operation.

BTL:

Select this if you’ve connected your front Speakers B for bridged opera- tion. The BTL indicator will appear on the display.

Note:

“Bi-Amp” and “BTL” cannot be selected if “Front(Speaker A)” is set to “Bi-Amp” or “BTL”.

7	Press the [SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

TV Format Setup

(not North American models)

For the onscreen setup menus to display properly, you must specify the TV system used in your area.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.
	The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “6. Miscella- neous”, and then press [ENTER]. The “Miscellaneous” menu appears.

6.Miscellaneous

1.Volume Setup

2.OSD Setup

	MOVE		ENTER ENTER RETURN RETURN SETUP EXIT
3	Use the Up and Down [q]/[w] but-
	tons to select “2. OSD Setup”,
	and then press [ENTER].
	The “OSD Setup” menu appears.
	6–2.	OSD Setup
	Immediate Display		On
	Monitor Type		16 : 9
	Display Position		Bottom
	TV Format		Auto
	Language		English
	MOVE	VALUE	RETURN RETURN SETUP EXIT
	Note:
	The “TV Format” (*) setting is not
	available on the North American mod-
	els.
4	Use the Up and Down [q]/[w] but-

tons to select “TV Format”, and then use the Left and Right [e]/[r] buttons to select:

Auto: Select this to have the AV receiver automatically detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC.

PAL: Select if the TV system in your area is PAL.

5	Press the [SETUP] button.
	Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

62