Onkyo TX-SR876 104, THX Audio Setup, Tons to select 6. THX Audio, Setup, and then press Enter

Advanced Setup—Continued

THX Audio Setup

These settings are not set automatically by the Auto- matic Speaker Setup function (see page 64).

With the “SurrBack Sp Spacing” setting, you can specify the distance between your surround back speakers. This setting is used by Speakers A and Speakers B.

If you’re using a THX-certified subwoofer, set the “THX Subwoofer” setting to “Yes”. You can then apply THX’s Boundary Gain Compensation (BGC) to compensate the perceived exaggeration of low frequencies for listeners sitting very close to a room boundary (i.e., wall).

You can also set the THX Loudness Plus feature “On” or “Off”. When the “Loudness Plus” is set to “On”, it is possible to enjoy even subtle nuances of audio expres- sion at low volume.

This result is only available when the THX listening mode is selected.

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.
2	Use the Up and Down [q]/[w] but-

tons to select “2. Speaker Setup”, and then press [ENTER]. The “Speaker Setup” menu appears.

2.Speaker Setup

1.Speaker Settings

2.Speaker Config

3.Speaker Distance

4.Level Calibration

	5.	Equalizer Settings
	6.	THX Audio Setup
		MOVE	ENTER ENTER RETURN RETURN SETUP EXIT
3	Use the Up and Down [q]/[w] but-
	tons to select “6. THX Audio
	Setup”, and then press [ENTER].
	The “THX Audio Setup” screen appears.
		2–6.	THX Audio Setup
		SurrBack Sp Spacing		> 4ft
		THX Subwoofer		Yes
		BGC		Off
		Loudness Plus		On
		Preserve THX Settings		- - -
		MOVE	VALUE	RETURN RETURN SETUP EXIT

When “Loudness Plus” is set to “Off”, the “Preserve THX settings” can be selected.

4

5

6

Use the Up and Down [q]/[w] but- tons to select “SurrBack Sp Spacing”, and use the Left and Right [e]/[r] buttons to specify the distance between your sur- round back speakers:

>4ft (>1.2m) (Default): Select this if your surround back speakers are more than 4 feet (1.2 m) apart.

<1ft (< 0.3m): Select this if your sur- round back speakers are between 0 and 1 foot (0–30 cm) apart.

1ft– 4ft (0.3m–1.2m): Select this if your surround back speakers are between 1 and 4 feet (0.3–1.2 m) apart.

Note:

Cannot be set if “SurrBack Ch” is set to “2ch” (page 96), “Speaker Type: Front(Speaker A) or Front(Speaker B)” is set to “Bi-Amp” or “BTL” (page 61), “SurrBack” is set to “None” (page 96) or “Not Use” (page 98), or “Powered Zone2” is being used (page 132).

Use the Up and Down [q]/[w] but- tons to select “THX Subwoofer”, and use the Left and Right [e]/[r] buttons to select:

No: Select this if you do not have a THX-certified subwoofer.

Yes: Select this if you have a THX- certified subwoofer.

Use the Up and Down [q]/[w] but- tons to select “BGC”, and use the Left and Right [e]/[r] but- tons to select:

Off: Select this to turn off BGC.

On: Select this to turn on BGC.

Note:

This setting is only available if “THX Subwoofer” is set to “Yes” (step 5).

104