Onkyo TX-SR876 instruction manual Monitor Out

Advanced Setup—Continued

Monitor Out

Resolution

You can specify the output resolution for the HDMI out- puts and have the AV receiver upconvert the picture res- olution as necessary to match the resolution supported by your TV.

Through: Select this to pass video through the AV receiver at the same resolution and with no conversion (default).

Auto: Select this to have the AV receiver automat- ically convert video at resolutions not sup- ported by your TV.

(Not available when the “Monitor Out” set- ting is set to “Analog”.)

480p (480/576p):

Select this for 480p or 576p output and video conversion as necessary.

720p: Select this for 720p output and video con- version as necessary.

1080i: Select this for 1080i output and video con- version as necessary.

1080p: Select this for 1080p output and video con- version as necessary.

(Not available when the “Monitor Out” setting is set to “Analog”.)

Source: Output will be according to the resolution level which was set with Resolution inside Source: 4-4. Picture Adjust. (Setting for each Source becomes possible.)

Brightness

With this setting you can adjust the picture brightness. Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the darkest. “+50” is the brightest.

Contrast

With this setting you can adjust Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the least. “+50” is the greatest.

Hue

With this setting you can adjust the red/green balance. Can be adjusted from –20 to +20 in steps of 1 (default is 0).

“–20” is the strongest green. “+20” is the strongest red.

Saturation

With this setting you can adjust saturation.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the weakest color. “+50” is the strongest color.

Gamma

Adjust the balance of incoming picture R (red), G (green), and B (blue) color data signal to the output color data signal.

Can be adjusted from –3 to +3 in steps of 1 (default is 0).

R Brightness

With this setting you can adjust the picture red bright- ness.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the darkest. “+50” is the brightest.

R Contrast

With this setting you can adjust red Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the least. “+50” is the greatest.

G Brightness

With this setting you can adjust the picture green bright- ness.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the darkest. “+50” is the brightest.

G Contrast

With this setting you can adjust green Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the least. “+50” is the greatest.

B Brightness

With this setting you can adjust the picture blue bright- ness.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the darkest. “+50” is the brightest.

B Contrast

With this setting you can adjust blue Contrast.

Can be adjusted from –50 to +50 in steps of 1 (default is 0).

“–50” is the least. “+50” is the greatest.

94