Front & Rear Panels—Continued

au REMOTE CONTROL

This u(Remote Interactive) jack can be con- nected to the ujack on another u-capable Onkyo component for remote and system control.

To use u, you must make an analog audio connec- tion (RCA) between the AV receiver and the other component, even if they are connected digitally.

bRS232

cPHONO IN

This audio input is for connecting a turntable.

dCOMPONENT VIDEO IN 1, 2, and 3

These RCA component video inputs are for con- necting components with a component video out- put, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Setup” on page 58.

eCOMPONENT VIDEO MONITOR OUT

This RCA component video output is for connect- ing a TV or projector with a component video input.

fHDMI IN 1–4, OUT MAIN, and OUT SUB

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with an HDMI output, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Video Input Setup” on page 56.

The HDMI outputs are for connecting a TV or pro- jector with an HDMI input.

gSIRIUS antenna (on North American model)

This jack is for connecting a SIRIUS digital antenna, sold separately (see the separate SIRIUS instructions).

hXM antenna (on North American model)

This jack is for connecting an XM Mini-Tuner and Home Dock, sold separately (see the separate XM instructions).

iMONITOR OUT

The S-Video or composite video jack should be connected to a video input on your TV or projector.

jAM ANTENNA (not North American model)

These push terminals are for connecting an AM antenna.

kZONE 2 OUT

This composite video output can be connected to a video input on a TV in Zone 2.

lFM ANTENNA (not North American model)

This jack is for connecting an FM antenna.

mIR IN/OUT

A commercially available IR receiver can be con- nected to the IR IN jack, allowing you to control the AV receiver while you’re in Zone 2, or control it when it’s out of sight, for example, installed in a cabinet.

A commercially available IR emitter can be con- nected to the IR OUT jack to pass IR (infrared) remote control signals through to other components.

nETHERNET port (TX-NR906 only)

This port is for connecting the AV receiver to your Ethernet network (e.g., router or switch) for playing music files on a networked computer or media server, or for listening to Internet radio.

o12V TRIGGER OUT ZONE 2

This output can be connected to the 12-volt trigger input on a component in Zone 2. When Zone 2 is turned on, a 12-volt trigger signal is output.

pAM and FM ANTENNA (HD Radio reception) (on North American model)

The AM push terminals are for connecting an AM antenna. The FM jack is for connecting an FM antenna.

qAC INLET

The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.

rDIGITAL COAXIAL IN 1, 2, and 3

These coaxial digital audio inputs are for connect- ing components with a coaxial digital audio output, such as a CD player or DVD player. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 59.

sDIGITAL OPTICAL IN 1, 2, and OUT

These optical digital audio inputs are for connecting components with an optical digital audio output, such as a CD player or DVD player. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Audio Input Setup” on page 59.

The optical digital audio output is for connecting a digital recorder with an optical digital input, such as a CD recorder.

tGND screw

This screw is for connecting a turntable’s ground wire.

uCD IN

This analog audio input is for connecting a CD player’s analog audio output.

13

Page 13
Image 13
Onkyo TX-SR876 Remote Control, RS232 Phono, Component Video in 1, 2, Component Video Monitor OUT, Zone 2 OUT, Ir In/Out