Onkyo TX-SR876 134, Selecting an Input Source for Zones, Turning Off Zones, OFF button

Zone 2 and Zone 3—Continued

Selecting an Input Source for Zones

your main room, SIRIUS for Zone 2, and AM/FM for Zone 3.

1

Remote

controller

On the remote controller, press the [ZONE2] or [ZONE3] REMOTE MODE button.

Turning Off Zones

AV receiver

On the AV receiver, press the [ZONE 2] or [ZONE 3] button.

The ZONE 2 or ZONE 3 indicator flashes, and the input selector currently selected for the zone appears on the dis- play.

1

Remote

controller

AV receiver

On the remote controller, press the [ZONE2] or [ZONE3] REMOTE MODE button.

On the AV receiver, press the [ZONE 2] or [ZONE 3] button.

The ZONE 2 or ZONE 3 indicator flashes.

2			On the remote controller, use the
	Remote		INPUT SELECTOR buttons.
	controller
DVD	VCR/DVR	CBL/SAT	On the AV receiver, use the input
1	2	3
GAME/TV	AUX1	AUX2	selector buttons, or press the
4	5	6	[ZONE 2] or [ZONE 3] button
TAPE	TUNER	CD
7	8	9	repeatedly.
PHONO	NET/USB

2

Remote

controller

On the remote controller, press the [STANDBY] button.

On the AV receiver, press the

+10 0

or

AV receiver

The input source is selected, the zone is turned on, the name of the input selec- tor appears on the display, and the ZONE 2 or ZONE 3 indicator lights continuously.

You can also use the AV receiver’s INPUT SELECTOR buttons.

AV receiver

[OFF] button.

The zone is turned off, and the ZONE 2 or ZONE 3 indicator goes off.

Note:

Notes:

•To select AM or FM, press the [TUNER] input selec- tor button repeatedly. On the North American model, you can also select XM or SIRIUS.

•Only analog input sources are output by the ZONE 2 PRE OUT, ZONE 3 PRE OUT and ZONE 2 L/R speaker terminals. Digital input sources are not out- put. If no sound is heard when an input source is selected, check if it’s connected to an analog input.

•While Powered Zone 2 is being used, listening modes that need surround back speakers (i.e., Dolby Digital EX, DTS-ES, and THX Ultra2 Cinema) are unavail- able.

•When Zone2 is on, Pure Audio cannot be selected.

•When Zone 2 is turned on, the output from the 12V TRIGGER OUT ZONE 2 goes high (+12 volts).

•While Zone 2 or Zone 3 is on, the Auto Power On/ Standby and Direct Change ufunctions do not work.

•You cannot select different AM or FM radio stations for your main room, Zone 2, and Zone 3. The same AM/FM radio station will be heard in each room.

•On the North American model, you can select a differ- ent radio source for each room. For example, XM for

When Zone 2 is turned off, the output from the 12V TRIGGER OUT ZONE 2 goes low (0 volts).

134