an event, the priority of the amplifier is given to continually checking its health. Attempts to Write to the amplifier during and immediately following an event may result in communication errors.
Ordinarily, the amplifier should clear any faults when the condition that causes them clears. Substantial changes to the amplifier param- eters via the bitwriter may result in the audio being interrupted momentarily. Also, the amplifier is designed to fade up from protec- tion events and when turned on.
NOTE: The amplifier can be reset by removing power to the main battery terminals and keeping the remote line off for at least 30 seconds.
The major and minor revision levels of the ESP2 software should be referenced should it be necessary to contact Directed Electronics or Orion.
© 2009 Directed Electronics. All rights reserved. | 23 |
