INSTRUCTIONS FOR USE
BEFORE USING YOUR OSTER® MIXMASTER® STAND MIXER
Before assembling your Oster® Mixmaster® Stand Mixer, be sure the power cord is unplugged from the power outlet and the speed control dial is in the “O” position.
Figure 1
Figure 2 | Figure 3 |
|
|
1.Press the tilt button located on the stand and swing the mixer head up. The mixer head will lock into this tilt position so you can insert the beaters or dough hooks and
the bowl (Figure 1).
2. Insert the beater with the round/oval shape
into the back socket and the beater with the flat bottom shape and plastic pieces into the front socket (the socket located on same side as the speed controls in the mixer) (Figure 2). To insert the dough hooks, place the one with the shorter hook into
the back socket and the one with the
longer hook into the front socket (the socket located on same side as the speed controls in the mixer) (Figure 3).
Important: Please review Figure 4. The illustration on the left is how the dough hooks should look when correctly inserted. However, should the dough hooks once inserted to be touching, as they do in the illustration on the right, then they have been inserted incorrectly.
Figure 4 |
|
| Note: Be sure both beaters or dough | |
|
|
| hooks click firmly in place, you may need | |
|
|
| to twist the attachments slightly to engage | |
CORRECT | INCORRECT |
| them in position prior to pushing them into | |
|
|
| place. | |
|
| 3. Place the mixing bowl onto the plate | ||
|
|
| located on the stand and lock it by turning | |
|
|
| it clockwise (Figure 5). | |
|
| 4. Press tilt button to lower the head with the | ||
|
|
| attachments already in place and into the | |
|
|
| bowl. Ensure mixer head locks into place | |
|
|
| (Figure 6). | |
Figure 5 | Figure 6 |
|
|
|
|
|
|
| |
|
|
| 4 |
|
|
|
|
|
|
