Palm Treo 755P manual Using Flash mode during a call, Press Send from Active Call View

Y O U R P H O N E

3

Using Flash mode during a call

Flash mode enables you to manually manage your calls while one or more calls are active. This mode is often used during a conference call when one of the calls has ended but the other remains connected.

1Press Send from Active Call View.

2If the Do you want to switch to Flash mode prompt appears, select Yes.

3While in Flash mode, do any of the following:

•If you have one call in progress and answer an incoming second call,

press Send to swap between the calls.

•If you have one call in progress, to make an outgoing second call, dial the number using any of the methods described in Making calls.

•If you have one call in progress and place an outgoing second call, press

Send after establishing a connection with the second party to set up a conference session using three-way calling.

•If you have two calls in conference,

press Send to hang up one of the calls; you can then dial another number and place the new caller into the conference session.

4To exit Flash mode and end all the calls,

press Power/End .

Forwarding calls

Please check with your wireless service provider about availability and pricing of forwarding calls to another phone; call forwarding is not available in all areas, and additional charges may apply.

C H A P T E R

W H A T C A N I D O W H E N I ’ M O N A C A L L ? 51