Palm manual Charging your handheld, Done Tungsten T5 Handheld

CHAPTER 1 Setting Up Your Handheld and Your Computer

[ ! ] Before You Begin

If you’re upgrading from another Palm Powered device, synchronize your old handheld with your old desktop software.

Tip

After the initial charge, charge your handheld at least half an hour every day.

Step 1: Charging your handheld

1	Connect your handheld:
	a. Plug the USB sync cable into

your handheld and into a USB port on the back of your computer.

b. Plug the AC charger into the Multi-connector on the sync cable and into an outlet.

2	Charge your handheld for three hours. Be sure your handheld is fully charged
	before going on to Step 2.

Done

Tungsten™ T5 Handheld 4