7. Mounting of the Betacam Format VTR

7-1 Mounting the optional VTR Adaptor WV-VT16A Mount the VTRAdaptor by connectlng the 68-pin con- nector on the camera and the VTR Adaptor, and engage the lock mechanism of the VTR Adaptor and the camera head. Then tighten two VTR Adaptor Holding Knobs firmly and make sure the VTR Adaptor is securely fixed to the camera.

7-2 Mount the VTR on the VTR adaptor while engaging the connectors and lock mechanism

7-3 Secure the VTR with two screws which come with the VTR.

-36-

8. Installation of the AC Adaptor/Charger WV-PS34

When the AC Adaptor/Charger, WV-PS34, is used with the ENG/EFP Colour Camera as an AC Adaptor,

this installation procedure should be followed:

 

8-1 lnstall t h e

AC

Adaptor/Charger

on t h e

rear of

the

c a m e r a

b y

matching t h e

recesses

in t h e

AC

Adaptor/Charger

with the rails

on the

camera

and

then sliding it down the rails.

8-2 Connevt the 4-pin cable to the 4-pin external DC Input connector on the camera.

8-3 When removing the AC Adaptor/charger, disconnect the 4-pin cable and remove the AC Adaptor/Charger by sliding it up while pressing the Release Button

- 37 -

Page 17
Image 17
Panasonic AW-F575E manual Mounting of the Betacam Format VTR, Installation of the AC Adaptor/Charger WV-PS34