117. Remote Control Box (RCB) Operation Switch
(RCB)
When connecting the Remote Control Box to the cam-
era without using the Remote Control Box, set this switch to ON position. When the RCB is installed in the RCU, this switch can not operate.
118.Remote Control Box Indicator (ON/OFF) This indicator lights when control data is communicat- ed between the camera and the Remote Control Unit (RCU) or Remote Control Box (RCB).
119.High Gain Selection switch (GAIN. HlGH/MID/LOW) The gain up level can be selected by this switch
The Ievet of HIGH, MID and LOW can be set by the Sub Menu with the combination shown below
120.Night Eye Selection Switch (NIGHT EYE, HIGH/LOW/OFF)
HIGH:
LOW:
OFF:
Note: When this switch is set the HIGH or LOW posi- tion, the High Gain Selection Switch (119) does not work.
121. Colour Bar/Camara Selection Switch (BAR/CAM)
In a system configuration, this switch is used for signal selection between camera mode and colour bar mode.
BAR: A colour bar signal is provlded from the Video Output Connector (146) on the Remote Control Unit (RCU)
CAM: The actual picture, as picked up through the lens is displayed
122.Detail Level Selection Switch (DTL,
The detail/aperture level can be selected by this switch in three steps. Set this swltch to the desired position while observing the sharpness of the picture.
123.Red and Elua Gain Controls (PAINTlNG, R GAINB GAIN)
These controls are used to manually adjust the whlte balance.
These controls only work when the Whlte Balance Selection Switch (126) is set to the A or B position and
PAINTING in No. 2 Sub Menu is set to the ON
turn the controls clockwise to increase the red and blue signal levels and counterclockwise to decrease these levels.
Note: As these controls employ Digital Processing, the Red and Blue signal levels will be changed in discrete steps
124. Red and Blue Pedestal Level Controls (PED, R/B)
The black balance can be set manually by these con- trols when fine PAINTING in No.2 Sub Menu is set to the ON. Turn these controls clockwise to increase the red and blue pedestal levels, and CounterclockwIse to decrease the levels
Note: Asthese controls employ the Digital Processing, these level will be changed in dls- crete steps
125. Total Pedestal Level Control (TOTAL PED)
This control can adlust the pedestal level of the vtdeo slgnal (IumlnanCe) for matchlng tha black ievel between WO or more cameras in a system. Turn this control clockwlse to increase the pedestal level, and counterclockwise to decrease the level.
Note: As this control employs the Digital Processing. this level will be changed in discrete steps.
126. White Balance Selection Switch (AUTO/ATW, ATW/A/B)
This switch is used to select the white balance modes as follows:
ATW: The white balance can be adjusted automatical- Iy
A:The White Balance can be set automatically by pressing the Auto White/Auto Black Set Swltch
(127)upwards. The setting is stored in memory A.
B:Simllar to A, but the setting is stored in memory B
Note: Two white balance setting, one each for dlffer- ent lighting conditions such as indoor and out- door, may be stored in the two memories, A and B.
127.Auto White/Auto Black Set Switch
(AWC/HOLD/ABC)
This switch Sets the white balance and black balance automatically as follows:
AWC: This position is used for setting the white bal- ance when the White Balance Selection Switch
(126)is set to the A or B position. White balance adjustment is required when "AWC A NG" or "AWC B NG" is displayed in the viewfinder or when the Auto Warning indicator (129) on Iights
HOLD: In this posltlon, the white and black balances set at the AWC or ABC position can be held flxed, if so desired, for at least one year
ABC: Thls posltlon IS used for senlng the black bal- ance when the White Balance Selectlon Swltch (126) is set to the A or B positlon
Black balance adjustment is required when ‘ABC NG’ is displayed in the viewfinder or when the Auto warning indicator (129) on the Remote Control Unit (RCU) Iights.
Note: While the black balance adjustment is being performed, the picture will flash in the vlewfinder and on the monitor screen. This flashing indicates that the adjustment is currently being performed and will cease once the adjustment is completed.
128. Lens Iris Selection Switch (IRIS, M/A/AUTO)
This switch is used to set the lens iris of the
AUTO: The iris level of the lens is controlled automati- cally
Note: Be sure to set the iris Control Selection Switch on the zoom lens to the AUTO position
MAN: The iris level of the lens is controlled to the desired level by using the Lens iris Control (130).
129. Auto Warning Indicator (AUTO)
This indicator blinks while the white balance or black balance is being automatically set, it goes out once the white and black balances have been correctly set This indicator Iights when the white or black balance is set improperly. In this case, carry out the automatic setting procedure for whtte and/or black balance
130. Lens Iris Control (IRIS)
The iris level of the zoom lens can be manually con- trolled by turning this control when the Lens Iris Selection Switch (128) is set to the MAN position. ‘AUTO IRIS' on Sub Menu/User Set Menu is set to ‘ADJ ON' in the Auto Iris mode, the fine adjustment of this level is avalilable
131.Scene Selection Switch (SCENE USER SET, 1,2,3) This switch is used to select the most suitable camera conditions, depending on scene conditions, to obtain the best picture possible.
Refer to page 60 for details
132.Electronic Shutter Speed Selection Switch
(SHUTTER 0FF/120,500,1000, S/S, ELC)
This switch is operative only when a camera featurlng the electronic shutter is connected with the Remote Control Unit.
When
OFF: Set this switch to this position when recording normally with standard shutter speeds
120/500/1000: Choose the suitable shutter speed from these
S/S: The shutter speed can be continual changed from 50 0 250 4 Hz at this position by using the SYNCRO in No 1 Sub Menu
ELC: The ELC posistion makes the electric control for the luminance with the shutter
- 21 -
Note: The smear may be appeared with the high light objects
133. Down switch (DOWN)
used to choosa eslred
This switch is used to decrease the set value of the
item pointed out by the cursor when in the User Set menu
134. Up Switch (UP)
This swltch is used to increase the set value of the desired item pointed out by the cursor when in the User Set menu.
135. Item Switch (ITEM)
This switch is used to choose the item in the
menus.slgnal
136. Page Switch (PAGE)
This switch is used to choose the desired
137. User Set ENC/VF Selection Switch
(ENC/VF, OFF/ON)
This switch selects Encoder output or EVF (black and subcarrler
white) output from the Video Output Connector and whether the User Set Function is available as follows
1Switch set to position ENC/OFF
The User Set function is not available
2Switch set to position ENC/ON:
The User Set function is available.
3. Switch set to position VF/ON:
User Set function isavailable and the menu is dis- played on the monitor and EVF
138.Horizontal Phase Control for
139.Subcarrier Phase Coarse and Fine Controls
(SC PHASE COARSE/FINE)
These controls allow for adjustment of the camera sig- nal subcarrier phase from 0º to 360º, to match the phase with that of the burst signal at the
The COARSE control adjusts the subcarrier phase phase
from 0º to 360º in 90º steps, while the FINE control allows for continuous fine adjustment over a range of
90º |
|
|
140. Intercom Jack (INTERCOM) |
|
|
This jack is used for communications | between the | ’ |
camera operator and Remote Control | Unit (RCU) |
|
operator in a system configuration with a Special Effects Generator
141.Tally Indicator (REC/TALLY)
When the Remote Control Unit (RCU) is used in con- junction with a Special Effects Generator, the Tally Indicator Inside the viewfinder as well as this indicator on the Remote Control Unit (RCU) will light to indicate that recording is in progress.
