Panasonic AW-F575E manual Audio Level Display, AWC Memory/Auto Function Display

1. Audio Level Display

The audio output level from the camera or the playback audic level of the 3/4"U-VISION or 1/2" S-VHS VTR is displayed by minus 0 and +plus 0 letters with the ONE-step (One step equals to 3dB)

Note: By pressing the Check Switch on the camera, this display is also made.

					Display		Audio level
							Low Level
I	-		-
	-		-	-
	-		-	-	-
		-	-	-	-	-	Standard Level
	------+
	-		-	-	-	- + +	High Level

2. AWC Memory/Auto Function Display

2-1. When the White Balance Selection Switch (26) setting is changed, one of the following displays appears for one second

Display	Description
AWC A	The White Balance Selection Switch has been set to AWC A. The automatic white balance control memorized in
	A is being activated
AWC B	The White Balance Selection Switch has been set to AWC B. The automatic white balance control memorized in
	B is being activated.
ATW	The Whie Balance Selection Switch has been set to AWC Band. AWC B/ATW of the No.2 Sub-menu has been set
	to ATW. The Auto Tracinq White Balance is being activated
AWC PSET	The White Balance Selection Switch has been set to PRESET. This camera is in the preset condition (Colour tem-
	perature is 3200º K).

Note: By pressing the Check Button (25) on the camera, this display is also made

- 68 -

2-2. Auto Function Display

Automatic white Balance Control (AWC)

If the following displays are shown in the viewfinde, the AWC can not be functioned.

Set the Auto White/Auto Black Set Switch (6) on the camera or (127)/(176) on the RCU to the AWC positlon

	Display	Display Time		Auto Warning	Cause			Remedy
				Indicator
	HIGH LIGHT	2 seconds		ON	Excessive britght Iight		Reduce Iighting on object or reduce lens iris.
							Reset the white balance.
	AWC PSET	2 seconds		ON	White Balance Selection Switch		Set this switch to AWC A or AWC B
					is set to PRESET
	LOW LIGHT	2 seconds		ON	Insufficient Light		Prepare an additional Iight source.
							Reset the white balance
	AWC NG	2 seconds		ON	Out of white balance setting		Change the object or filter
					range
	ATW	2 seconds		-	ATW operation		Set this switch to the AWC A or AWC B
					Colour Bar/Night Eye/Camera
-				-	Selection Switch (27) on the		Set the Colour Bar/Night Eye/Camera Selection
					camera or (121) on the RCU is		Switch to CAMERA
					set to BAR
	AWC A	2 seconds		Blinking	White balance is being set.		The White Balance Selection Swich has been to
							AWC A.
	AWC B	2 seconds		Blinking	White balance is being set.		The White Balance Selectlon Swich has been to
							AWC B
	AWC A/AWC B	2 second		OFF	White balance setting iscom-		The Whlte Balance Selection Switch has been to
,					pleted.		AWC A.
	OK
2-3.Automatic Blaik Balance Control (ABC)
	When the Auto White/Auto Black Set Switch				(6) on the camera or (127)/(176)	on the RCU is set to the ABC position, the black
	balance is automatically		set. Refer to 'Setting the Black Balance' on page 56 for details.
	Display	Display Time		Auto Warning	Cause			Remedy
				Indicator
	LENS OPEN	2 seconds		ON	Lens iris is not closed		Check the lens connector.
	ABC NG	2 seconds		ON	Out of the black balance setting		Refer to the qualifled service personnel.
	(RGB)				range
	ABC	2 seconds		Blinking	Black balance is being set
	ABC OK	1 second		OFF	Black balance setting is com-
					pleted.

- 69 -