Controls and Their Functions  (continued)Front panel

HEADPHONES

VIDEO SDI 1

SDI 2 HDMI

DVI-I

1

2

3

4

5

MENU

RETURN

 

 

INPUT SELECT

 

 

 

FUNCTION

 

 

 

PICTURE VOLUME

5

 

6

 

1

 

2

1POWER <8> switch

Switches the power supply ON/OFF. When the power is on, the LED (green) lights.

To turn the power off, press and hold the switch for at least three seconds.

2INPUT SELECT buttons

Selects the signal input line. The green LED light above the

pressed button indicates the selected input signal. VIDEO : Video input

SDI1

: Serial digital interface input (compatible with 3G/

 

HD/SD)

SDI2

: Serial digital interface input (HD/SD compatible)

HDMI

: HDMI input (HDCP compatible)

DVI-I

: DVI-I input (HDCP compatible)

Selects one of the following four input signals: digital video or PC signal, analog video or PC signal.(→page 44)

When the power is turned on, the input line used when the power was last turned off is selected.

In 3D assist and TWO WINDOW mode, the input is fixed to SDI1/SDI2 and the input line cannot be changed. (Then both the SDI1 and SDI2 LEDs go on.)

Switching the [2D/3D ASSIST] menu from [3D ASSIST] to [2D] will return the input line to the previous 2D setting.

Switching the TWO WINDOW function from ON to OFF will return the input line to the previous OFF setting. How- ever, turning on the SUB WINDOW function or the PIC- TURE ASSIST function when the TWO WINDOW function is on, activates SDI1 operation, and when the 2-screen display function is off, the SDI1 input line is used.

When the control lock is on, the mark appears and input lines cannot be changed.(→page 48)

When INT-SG (internal chart for adjustment [Color Bar

+Grayscale]) is selected, all LEDs above the <INPUT SELECT> button are off. Use the [INPUT SELECT] menu to select INT-SG. (→page 20)

3FUNCTION button FUNCTION1 to FUNCTION5:

Press to use function assigned to the FUNCTION button using a menu.

When the control lock is on, the  mark appears to indicate that FUNCTION operation is disabled.(→page 48)

34

4MENU button, rotary knob (with push-on switch (PIC- TURE) and RETURN/VOLUME button (→page 16)

Use these buttons to display menus, select and adjust set-

tings and perform menu selections.

MENU: Press to display or exit the [TOP MENU] ([MAIN MENU] (main menu), [FUNCTION] menu and [INPUT SELECT] menu).

Rotary knob: Turn the knob clockwise or counterclockwise to move the cursor up or down or to change set values.

Press the knob to start changing set values, to confirm them and to open submenus.

RETURN: Press to return to the previous menu or cancel

to recover a previously set value.

When no menu is open, press the rotary knob <PICTURE> or <RETURN/VOLUME> button to open a menu other than the [TOP MENU].

PICTURE: When no menu is open, press the rotary knob to open the [PICTURE] (picture adjusting) menu.(→page 17)

VOLUME : When no menu is open, press the <RETURN/ VOLUME> button to open the audio volume bar meter.(→page 17)

5Speaker (monaural)*1

Enables monitoring of analog AUDIO, SDI and HDMI signal inputs.

Connecting headphones to the HEADPHONES output jack turns off the speaker.

6HEADPHONES output jack (M3 stereo mini jack)*1 Allows you to connect headphones to monitor analog audio, SDI and HDMI signal inputs.

The sound volume and sound quality will depend on the headphones.

*1 • In 3D assist mode, you can monitor the left (L) channel of SDI1 audio.

In TWO WINDOW mode, you can monitor SDI1 and SDI2 audio selected using [AUDIO OUT SEL.].

12