REMOTE Specifications  (continued)

Assigned item

Function

Operating conditions

PIXEL TO PIXEL

Switches screen display between input size and

Level operation

 

display size.

(Short-circuited: ON, Open: OFF)

FOCUS-IN-RED

Displays the outlines of the subject that are in focus

Level operation

 

in red

(Short-circuited: ON, Open: OFF)

ZEBRA

Superimposes the ZEBRA pattern over an area of the

Level operation

 

image with a specified brightness signal level.

(Short-circuited: ON, Open: OFF)

REMOTE STANDBY  *4*5

Sets REMOTE STANDBY (the backlight is turned

Level operation

 

off).

(Short-circuited: ON, Open: OFF)

*4 When remote standby is set to ON, the front panel power LED flashes.

*5 When you use a menu to set this function after short-circuiting the GPI input terminal to which it will be assigned, the backlight goes out and the screen display goes blank making it impossible to check menu operation.

To change the setting of this item, be sure to set it when the GPI input terminal is in the open state.

Restrictions

• The same restrictions apply as during FUNCTION operations.

„„Priority of assigned functions

•When both [MARKER1 ON/OFF] and [MARKER2 ON/OFF] are activated at the same time, "MARKER1" has priority. However, when the display aspect ratio is 4:3, the “MARKER1” aspect ratio is 16:9 and the “MARKER2” aspect ratio is 4:3, “MARKER2” is displayed. In this case, the “MARKER2” background is controlled.

•When [MARKER BACK HALF] and [MARKER BACK BLACK] are activated at the same time, [MARKER BACK BLACK] has prior- ity.

•When [GAMMA SEL. FILM], [GAMMA SEL. STDIO/PST] and [GAMMA SEL. CINEMA] are simultaneously activated, priority goes to [GAMMA SEL. FILM]. The three modes in order of priority are: [GAMMA SEL. FILM] > [GAMMA SEL. STDIO/PST] > [GAMMA SEL. CINEMA].

61