Panasonic BT-LH2170E, BT-LH2170P Submenu, Setting, Setting, FUNCTION, HV DELAY, BLUE ONLY, DISPLAY *8, (continued), Description, GAMMA SELECT, Inoperable Condition or Mode

Main Menu  (continued)

Submenu	Setting		Description
(continued from the		[TIME CODE] *2
previous page)		Turns the time code display on and off.
		[CLOSED CAPTION] *2
		Turns the closed caption display on and off.
		For details on the available operation items, refer to page 37.
		[AUDIO MUTE]
		Turns the audio MUTE function on and off.
		[AUDIO OUT SEL.]
		Switches AUDIO output to SDI1 or SDI2 during TWO WINDOW function operation.
		[ANAMO]
		Turns the ANAMO function on and off.
		[TWO WINDOW]
		Turns the TWO WINDOW function on and off.
		[Y MAP]
		Turns the Y MAP function on and off.
		[PICTURE ASSIST]*1
		Turns the PICTURE ASSIST function on and off.
		[R COLOR]*7
		Cuts the red signals.
		This button toggles between ON and OFF.
		[G COLOR]*7
		Cuts the green signals.
		This button toggles between ON and OFF.
		[B COLOR]*7
		Cuts the blue signals.
		This button toggles between ON and OFF.
		[ZEBRA]*3
		Selects the ZEBRA function.
		The display changes in the following order.
		[ZEBRA OFF]→[ZEBRA INT.]→[ZEBRA EXT.]→[ZEBRA INT.+EXT.]
		[ZEBRA LEVEL]
		Displays the screen for adjusting the ZEBRA function.
		[2D/3D ASSIST]
		Switches between 2D and 3D assist mode.
		[UNDEF]
		Undefined
FUNCTION	OFF	Selects display of functions assigned to <FUNCTION1> - <FUNCTION5> (front panel
DISPLAY  *8	ON1	buttons). It also selects button action (1- touch, 2-touch, off).
	ON2  *9	[OFF]	1-touch action to perform functions. Functions are not displayed.
		[ON1]	1-touch action to display and perform functions.
		[ON2]	2-touch action to display and perform functions.

•Pressing the <FUNCTION1> to <FUNCTION5> buttons will not activate FUNCTION operation when the [PICTURE] (picture adjust- ing) menu has been opened with the rotary knob <PICTURE>.

*1 The settings are canceled when the power is turned OFF.

*2 When these settings are changed, the menu settings will also change. *3 The control settings do not operate during GPI operation.

*7 The OFF setting is canceled (ON setting) when the power is turned OFF . *8 The operating status is displayed regardless of the ON/OFF setting.

*9 When set to [ON2], only functions that are displayed can be button operated.

„„FUNCTION setting restrictions

Under the following conditions, [INVALID FUNCTION] is displayed and the settings cannot be configured.

Setting		Inoperable Condition or Mode
HV DELAY	• SUB WINDOW	• In TWO WINDOW mode
	• WFM	• PIXEL TO PIXEL
	• 3D ASSIST	• During PC signal input
	• When [INT-SG] is selected
BLUE ONLY	In Y MAP ON mode
GAMMA SELECT	• During GPI setting	• During PC signal input

(Continued on next page)

35