Error and Warning Information
If for any reason an error occurs in the monitor, the following indications are made to notify the error or warning.
| Error and Warning | Symptom | Remedy | |
Information | |||
|
| ||
| Warning of drop in | A [LOW VOLTAGE] indication in blue | If the monitor has powered down, connect an external | |
| external DC input voltage/ | flashes on the screen. | DC power supply providing 11.0 V or more and turn the | |
| LOW VOLTAGE | This means that the external DC power | POWER switch ON. | |
| supply input voltage has dropped to |
| |
| approximately 11.3 V or less. |
| |
|
|
| |
| The [LOW VOLTAGE] indication lights red |
| |
| on the screen and the power is turned off |
| |
| approximately 4 seconds later. |
| |
| This means that the external DC power |
| |
| supply input voltage has dropped below |
| |
| approximately 11.0 V. |
| |
|
|
|
Maintenance
•Clean the cabinet and LCD panel by gently wiping them with a soft cloth. To remove stubborn soiling, use a cloth dampened in a weak neutral detergent solution and thoroughly wrung out. Then wipe with a dry cloth. Any moisture entering the monitor could dam- age it.
•Never use alcohol, thinner or benzene to clean this monitor. They could discolor the surface and cause the paint to peel.
•Do not directly expose the monitor to spray cleaning. Any moisture entering the monitor could damage it.
71