Main Menu  (continued)

„„Functions displayed during FUNCTION button operation

Pressing any of the <FUNCTION1> to <FUNCTION5> buttons displays the operations assigned to each button as shown below.

Setting

Display

HV DELAY

[DELAY OFF] → [H DELAY] → [V DELAY] → [HV DELAY]

BLUE ONLY

[BLUE ONLY OFF]→ [BLUE ONLY ON]

GAMMA SELECT

[GAMMA STANDARD] → [GAMMA FILM] → [GAMMA STDIO/PST] → [GAMMA CINEMA]

SD ASPECT

[4:3]→[16:9]

SCAN

[NORMAL SCAN]→[UNDER SCAN]

SUB WINDOW

[SINGLE]→[FULL/PART]→[STILL]

WFM/VECTOR

[WFM/VECTOR OFF]→[WFM Y ON]→[WFM R ON]→[WFM G ON]→[WFM B ON]→

 

[VECTOR×1/×2S/×2/×4/×8]

MARKER

[MARKER OFF]→

 

[4:3 MARKER/13:9MARKER/14:9MARKER/CNSCO2.39 MARKER/CNSCO2.35 MARKER/2:1 MARKER/

 

VISTA MARKER/95% MARKER/93% MARKER/90% MARKER/88% MARKER/80% MARKER/

 

xx% MARKER*10 /xx%/yy% MARKER*11 ]

 

*10xx% indicates an 80 to 100% USER setting

 

*11xx%/yy% is the VAR set value for 80 to 100 % aspect ratio

 

• When the set values for both [16:9] and [4:3] are something other than [OFF] in the [MARKER] menu

 

settings, the [16:9] set value is displayed in the first half, and the set value of [4:3] is displayed in the

 

second half.

WHITE BALANCE

[WHITE BALANCE VAR 1/2/3]

PIXEL TO PIXEL

[PIXEL TO PIXEL OFF]→[PIXEL TO PIXEL LEFT/CENTER/RIGHT]

PIXEL POSITION

[PIXEL TO PIXEL LEFT]→[PIXEL TO PIXEL CENTER]→[PIXEL TO PIXEL RIGHT]

FOCUS-IN-RED

[FOCUS-IN-RED OFF]→[FOCUS-IN-RED ON]

LEVEL METER

[METER OFF]→[METER 2 CH/4 CH/8 CH]

CROSS HATCH

[CROSS HATCH OFF]→[CROSS HATCH LOW]→[CROSS HATCH HIGH]

MONO

[MONO OFF]→[MONO ON]

BLACK MODE

[BLACK MODE OFF]→[BLACK MODE ON]

TIME CODE

[TC OFF]→[LTC/VITC/LUB/VUB/LTC+LUB/VITC+VUB]

CLOSED CAPTION

The displayed items differ depending on the [CC TYPE] selection.

 

When the [CC TYPE] setting is [CEA-608 (ANC)], [CEA-608 (VBI)] or [CEA-608 (708)]:

 

[CC OFF]→[CC1/2/3/4]

 

When the [CC TYPE] setting is [CEA-708]:

 

[CC OFF]→[SRV1/2/3/4/5/6]

 

When the [CC TYPE] setting is [OP-42]:

 

[CC OFF]→[OP-42]

 

When the [CC TYPE] setting is [OP-47]:

 

[CC OFF]→[OP-47]

AUDIO MUTE

[AUDIO MUTE OFF]→[AUDIO MUTE ON]

AUDIO OUT SEL.

[SDI1]→[SDI2]

ANAMO

[ANAMO OFF]→[ANAMO ON]

TWO WINDOW

[SINGLE]→[TWO M/M]

Y MAP

[Y MAP OFF]→[Y MAP ON]

PICTURE ASSIST

[PICTURE ASSIST OFF]→[PICTURE ASSIST ON]

R COLOR

[R COLOR ON]→[R COLOR OFF]

G COLOR

[G COLOR ON]→[G COLOR OFF]

B COLOR

[B COLOR ON]→[B COLOR OFF]

ZEBRA

[ZEBRA OFF]→[ZEBRA INT.]→[ZEBRA EXT.]→[ZEBRA INT.+EXT.]

ZEBRA LEVEL

[SETTING]

2D/3D ASSIST

[2D]→[3D ASSIST]

<Note>

•[WHITE BALANCE] and [ZEBRA LEVEL] is switched to adjustment mode with a <FUNCTION> button, and operating status is not displayed.

•SUB WINDOW, TWO WINDOW, PICTURE ASSIST of the 2-screen display function are mutually exclusive functions - when one is on, the other two are off. For this reason, when one of the 2-screen display functions is on, the operating status of the function that is on is displayed when a screen is opened using the <FUNCTION> button.

•[CC1/2/3/4] and other [***/***] indications denote set values in relevant menus.

37