Panasonic BT-LH2170E, BT-LH2170P VIDEO, DVI-I, LEVEL, PHASE, CLOCK, RESET, CLOCK, CLOCK, ANALOG, Format, Format, Submenu, Setting, DIGITAL, Submenu, Setting, RGB-COMP, COMPONENT, NTSC SETUP

Main Menu  (continued)

INPUT SELECT

			Underlined values indicate factory defaults.
Submenu	Setting		Description
VIDEO	AUTO	Used to select the format for VIDEO input.*1
	NTSC	[AUTO]	Automatically selects NTSC or PAL.
	PAL	[NTSC]	NTSC
		[PAL]	PAL
NTSC SETUP	00	Selects NTSC setup level.
	75	[00]	Select this when there is no setup signal.
		[75]	Select this when using 7.5 % setup signals.
			(The monitor internally adjusts the 7.5 % setup level to suit the black level)
DVI-I	DIGITAL	Selects DVI-I input mode.
	ANALOG	[DIGITAL]	Selects digital input.
		[ANALOG] Selects analog input.
DIGITAL	AUTO	Selects the DVI-I digital input mode.
	VIDEO	[AUTO]	Selects the input mode automatically depending on the input format.
	COMP.	[VIDEO]	Selects component input.
		[COMP.]	Selects PC input.
ANALOG	YPBPR	Selects YPBPR (component) or RGB input mode when DVI-I is set to "ANALOG."
	RGB-COMP.	[YPBPR]	Selects the YPBPR signal.
		[RGB-COMP.] Selects the PC RGB signal.
COMPONENT	SMPTE	Selects the YPBPR (component) signal input level of DVI-I analog inputs.
LEVEL	B75	[SMPTE]	Signal level complies with SMPTE, and PB, PR are 0.7 V [p-p] at 100%
	B00		chroma.
		[B75]	Select this when connecting a Betacam or similar device with a setup function.
			(The monitor internally adjusts the 7.5 % setup level to suit the black level)
		[B00]	Select this when connecting a Betacam or similar device without a setup
			function.
RGB-COMP.	▼	Performs analog PC settings. (→ Below "RGB-COMP.")

*1 [AUTO] is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by outside noise.

„„RGB-COMP.

Selecting [ANALOG.] under [DVI-I] in the [INPUT SELECT] menu and selecting [RGB-COMP.] under [ANALOG] opens the following menu.

		Underlined values indicate factory defaults.
Submenu	Setting	Description
H POSITION	0 to 60	Adjusts horizontal image display position in 2-clock units. *2
	(Factory default setting:
	30)
V POSITION	0 to 15	Adjusts vertical image display position. *2
	(Factory default setting:
	8)
PHASE	0 to 31	Adjusts the clock phase in 1/32 clock period increments. *2
	(Factory default setting:
	16)
CLOCK	700 to 2200	Adjusts the sampling clock in 2-clock units. *2 *4
	(Factory default
	setting*3)
RESET		Returns [H POSITION], [V-POSITION], [PHASE] and [CLOCK] settings in the
		RGB-COMP. input compliant format to their factory defaults.

*2 Each compatible input format can be adjusted, but not when user data is loaded (→page 30 "SETUP LOAD") or saved (→page 30 "SETUP SAVE") .

*3 [CLOCK] factory default values

Format	CLOCK	Format	CLOCK
640×480 (60 Hz)	800	1280×768 (60 Hz)	1664
800×600 (60 Hz)	1056	1280×1024 (60 Hz)	1688
1024×768 (60 Hz)	1344

*4 This menu is disabled when the input signal format is 1920 x 1080 (60 Hz).

44