Panasonic BT-LH2170E, BT-LH2170P Name, PHASE, CHROMA, BRIGHT, F-IN-R, PEAKING, Function, defaults, CONTRAST, BACKLIGHT, Audio volume, Adjustable range, ( ): denotes factory

How to Use the On Screen Menu (continued)

Picture adjusting (PICTURE) menu

1.Turn the rotary knob <PICTURE> to select a menu item and press the rotary knob <PICTURE>.

•The menu closes and the set values of the selected menu items appear.

[PICTURE]

SETTING[FACTORY]

PEAKING 0 PHASE 30

CHROMA 30

BRIGHT 30

CONTRAST 50

BACKLIGHT 80

F-IN-R 15

MENU EXIT

[PHASE] 30

MENU EXIT RETURN RETURN

		Adjustable range
Name	Function	( ): denotes factory
		defaults.
PEAKING	PEAKING	0 to 30 (0)
PHASE	PHASE	0 to 60 (30)
CHROMA	CHROMA	0 to 60 (30)
BRIGHT	BRIGHT	0 to 60 (30)
CONTRAST	CONTRAST	0 to 60 (50)
BACKLIGHT	BACKLIGHT	0 to 100 (80)
F-IN-R	FOCUS-IN-RED	1 to 30 (15)

The text color of set values that are factory defaults is green and other values are white.

Settings are loaded when the monitor is turned on. However, operations and changes cannot be made in the following conditions.

•When the control lock is on, the mark appears and set values cannot be changed. (→page 48)

•When the [MONO] (→page 28) is set to [ON], [PHASE] and [CHROMA] operations are disabled.

•[F-IN-R] is enabled during operation of the FOCUS-IN- RED function.

•[BRIGHT] operation is disabled during [HV DELAY] (→page 34) operation (when it is in any other setting than OFF).

•[CONTRAST] and [BACKLIGHT] operations are disabled in [BLACK MODE] (→page 34).

2.Turn the rotary knob <PICTURE> to select a set value and press the rotary knob <PICTURE>.

•The set value is confirmed and the menu reappears.

•To cancel, press <RETURN/VOLUME> before pressing the rotary knob <PICTURE>.

[PHASE] 20

MENU EXIT RETURN RETURN

[PICTURE]

SETTING[FACTORY]

PEAKING 0

PHASE 20*

CHROMA 30

BRIGHT 30

CONTRAST 50

BACKLIGHT 80

F-IN-R 15

MENU EXIT

•When picture adjustments ([PEAKING]/[PHASE]/[CHRO- MA]/[BRIGHT]/[CONTRAST]/[BACKLIGHT]) have been changed from the values assigned using [SETUP LOAD] or

[POWER ON SETUP], an asterisk (*) appears to right of the menu name.

Audio volume

•For details on how to use the audio volume, refer to“Audio volume display” (→page17).

1.Turn the rotary knob <PICTURE> to select a set value.

[VOLUME] 30

MENU EXIT

•Set values are confirmed when they are changed.

•Changing the audio volume when audio output is muted (“AUDIO MUTE” (→page 35)) immediately cancels [AUDIO MUTE].

• is displayed when audio output of the monitor is muted.

•Audio volume is always available and is not affected by the [CONTROL] menu (→page 48).

•The adjustment range is 0 to 60 (the factory default is 0)