Standard accessories · Optional units

„„Standard accessories Power cable x 1 (BT-LH2170P) Power cable x 2 (BT-LH2170E)

Stand (already attached to the product) x 1

Stand screws (already attached to the product) x 3 CD-ROM x 1

Protection panel mounting screws (8 mm long M3 screws) x 4

•The customer can use these screws for permanent attachment of a protective panel designed for the monitor. (→page 11)

•Tightening torque: Tighten to about 30 N·cm or less

<Note>

After unpacking the monitor, dispose of the AC cord cap (BT-LH2170E only) and packaging material in an appropriate manner.

„„Optional units

• BT-WMA17G wall mount adapter (Leave installation of the wall mount adapter to authorized personnel.)

Outline

The BT-LH2170P/BT-LH2170E is a compact, flat panel LCD monitor for broadcast and industrial applications, equipped with a 54.6  cm (21.5 inch) (effective display area) LCD display.

„„High performance LCD panel

This product incorporates a full HD (1920 x 1080) LCD panel. It offers excellent color reproduction, a wide viewing angle, and a fast response time.

„„Superb Moving Image Quality Achieved by New ImageProcessing Engine

•A 3D Look Up Table (LUT) and a 10-bit image processing engine facilitate accurate and smooth gradation from low to high brightness levels.

•The inclusion of an I/P conversion circuit with a low delay of less than one field minimizes the delay time between signal input and monitor display.

•The use of a diagonal line compensation circuit reduces image degradation in the vertical direction and jagged noise on diagonal lines.

•The high-speed moving image response time provides vivid and clear image display.

•Gamma compensation is performed for each monitor.

„„Includes 3D Assist Functions

Various assist functions are included to allow connecting the left and right connectors of a 3D camera to the two SDI inputs and capturing 3D images that are easier to view on a 2D monitor. These functions also make camera adjustments easier and reduce the preparation time required for 3D shoot- ing.

„„Wide Variety of Functions and Interfaces

•Equipped with 3G-SDI, SDI (HD/SD compatible), HDMI, VIDEO, and DVI-I inputs.

•FOCUS-IN-RED function (Displayed abbreviated to F-IN-R in the [PICTURE] (picture adjusting) menu.)

Focusing the camera is extremely easy because the area of the image in focus is displayed in red to make it easy to see what is in focus.

•WFM (Y/R/G/B) and vectorscope display functions Capable of showing a Y/R/G/B waveform display for input signals (3G-SDI, SDI, HDMI, VIDEO, and DVI-I inputs) and a vectorscope display (for 3G-SDI and SDI inputs).

•Audio volume bar meter display function

There are level displays for embedded 3G-SDI, SDI and HDMI audio signals and analog audio signals. Furthermore, support is also included for reference point setting, peak hold, and overrange display.

The incorporation of a speaker and a HEADPHONES output jack means you can check the audio. There is also a menu for selecting channels.

•Closed caption function

The captions added to video signals can be displayed dur- ing SDI and VIDEO input.

•2-screen display function

The screen can be split into two to allow you to make a screen comparison for the same input connectors and same format. (SUB WINDOW function)

It can display two SDI inputs simultaneously in two windows. (TWO WINDOW function)

One input signal can be displayed on two windows for

3G-SDI, SDI, HDMI, VIDEO and DVI-I input VIDEO formats in combination with FOCUS-IN-RED, Y MAP, ZEBRA and other functions to simplify camera adjustments. (PICTURE ASSIST function)

•Cross hatch display function

This function displays markers at regular vertical and hori- zontal intervals to facilitate easy composition.

•External remote control

RS-485, RS-232C and GPI remote control terminals are provided.

A loop-through connection using the RS-485 input and output terminals allows control of multiple monitors (up to 32 monitors).

•IMD (in-monitor display) display

The RS-485 interface allows you to display text and the tally indication on the monitor.

9