REMOTE Specifications

This monitor enables remote operation via the GPI input terminal, the RS-232C input terminal or the RS-485 input/output terminal.

GPI input terminal

GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each terminal. (→page 43) The functions assigned to each terminal are executed as specified depending on whether GND (pin 5) is short-circuited (ON) or open (OFF).

„„Operating conditions

 

Level operation: Operates when GND is short-circuited.

 

Edge operation: Operates when GND changes from open to short-circuited.

 

<Note>

GPI input terminal

• When level operation is assigned to more than one terminal, the

(9 pins)

function operates as long as one of the terminals is short-circuited.

 

• Hold the edge operation for at least 0.2 seconds after the change.

 

Pin Signal number

1GPI1

2GPI2

3GPI3

4GPI4

5GND

6GPI5

7GPI6

8GPI7

9 GPI8

Assigned item

Function

Operating conditions
UNDEF

Undefined (no function assigned)

—

MARKER1

Switches marker display defined in [GPI MARKER1]

Level operation

ON/OFF  *1

(→page 25) in the [MARKER] menu.

(Short-circuited: ON, Open: OFF)

MARKER2

Switches marker display defined in [GPI MARKER2]

Level operation

ON/OFF  *1

(→page 25) in the [MARKER] menu.

(Short-circuited: ON, Open: OFF)

MARKER BACK HALF  *2

Reduces the brightness of the background outside

Level operation

 

the marker displayed in [GPI MARKER1] (→page 25)

(Short-circuited: ON, Open: OFF)

 

to 50 %.

 

MARKER BACK BLACK  *2

Reduces the brightness of the background outside

Level operation

 

the marker displayed in [GPI MARKER1] (→page 25)

(Short-circuited: ON, Open: OFF)

 

to 0 %.

 

CENTER MARKER

Turns the center marker display on and off.

Level operation

 

(When other markers are displayed, this marker is

(Short-circuited: ON, Open: OFF)

 

superimposed on other markers.)

 

CROSS MARKER

Turns the cross marker display on and off. (When

Level operation

 

other markers are displayed, this marker is

(Short-circuited: ON, Open: OFF)

 

superimposed on other markers.)

 

INPUT SEL. VIDEO

Switches the input line to VIDEO.

Edge operation

INPUT SEL. SDI1

Switches the input line to SDI1.

Edge operation

INPUT SEL. SDI2

Switches the input line to SDI2.

Edge operation

INPUT SEL. HDMI

Switches the input line to HDMI.

Edge operation

INPUT SEL. DVI-I

Switches the input line to DVI-I.

Edge operation

INPUT SEL. INT-SG

Switches the input line to INT-SG.

Edge operation

SD ASPECT

Sets the aspect ratio for SD signal input. (Disabled

Level operation

 

during HD signal input)

(short-circuited: 16:9, open: 4:3)

SCAN

Switches the scan mode between UNDER and

Level operation

 

NORMAL.

(Short-circuited: UNDER, Open:

 

 

NORMAL

R-TALLY  *3

Lights the red tally.

Level operation

 

 

(Short-circuited: ON, Open: OFF)

G-TALLY  *3

Lights the green tally.

Level operation

 

 

(Short-circuited: ON, Open: OFF)

MONO

Switches between color and monochrome (MONO).

Level operation

 

 

(Short-circuited: monochrome, Open: color)

GAMMA SEL. FILM

Switches the gamma curve to FILM mode.

Level operation (Short-circuited: FILM mode,

 

 

Open: STANDARD mode)

GAMMA SEL. STDIO/PST

Switches the gamma curve to STDIO/PST mode.

Level operation (Short-circuited: STDIO/

 

 

PST mode, Open: STANDARD mode)

GAMMA SEL. CINEMA

Switches the gamma curve to CINEMA mode.

Level operation (Short-circuited: CINEMA

 

 

mode, Open: STANDARD mode)

*1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display, both markers are displayed.

*2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by the 16:9 marker is controlled.

*3 When [R-TALLY] and [G-TALLY] simultaneously go on, the tally color changes to amber.

60