Panasonic BT-LH2170E, BT-LH2170P LCD, CONTROL, Submenu, Setting, CONTROL, Submenu, Setting, OPERATION, (continued), Description, HOURS METER, Description, RS-485STX&ETX, RS-485ID SETUP

Main Menu  (continued)

CONTROL

					Underlined values indicate factory defaults.
Submenu	Setting				Description
CONTROL	LOCAL	Selects operation. (with control lock)
	REMOTE	[LOCAL]	Front panel operation is enabled (including controls that use the GPI
			function)
		[REMOTE] Remote operation enabled (controls using RS-232C or RS-485. Front
			panel operation is locked)
			• Power On/Off, VOLUME operations, GPI control and menu dis-
			play are available when the lock is engaged.
			• Only [CONTROL]/[LOCAL ENABLE] menu items are available
			when the lock is engaged.
			• The rotary knob <PICTURE> cannot be used to change set val-
			ues when the lock is engaged.
			• The [LOCAL ENABLE] setting determines operations in lock
			mode.
			• The		mark appears in the operation status display, menu
			display ([MAIN MENU] (main menu), [FUNCTION] menu, [IN-
			PUT SELECT] menu), [PICTURE] (picture adjusting) menu, and
			FUNCTION display screens when the lock is engaged.
				[MARKER]		Mark
				MARKER	OFF
				16:9	4:3
LOCAL ENABLE  *1	DISABLE	Selects whether to enable or disable <INPUT SELECT> and <FUNCTION>
	INPUT	button operations when [REMOTE] is selected under [CONTROL].
	FUNCTION	[DISABLE]		Disables <INPUT SELECT> and <FUNCTION> button
	INPUT+FUNC.			operations.
		[INPUT]		Enables <INPUT SELECT> button operations.
		[FUNCTION] Enables <FUNCTION> button operations.
		[INPUT+FUNC.] Enables <INPUT SELECT> and <FUNCTION> button
				operations.
PROTOCOL VER.*2	V3.1	Selects version of the TSL protocol.
	V4.0
RS-485 ID SETUP	0 to 126	Sets the monitor ID number to use RS-485 communication.
	(Factory default
	setting: 0)
RS-485 STX&ETX	OFF	Select RS-485 interface command format (→page 63).
	ON	[OFF]STX and ETX need not be placed.
		[ON] STX and ETX must be placed.

*1	Only available when [REMOTE] is selected under [CONTROL].
*2	The monitor supports version 3.1 and 4.0 of the TSL UMD PROTOCOL provided by Television System LTD.
HOURS METER
	Submenu	Setting	Description
OPERATION		xxxxxxh  *1	Displays the total number of hours it has been on.
LCD		xxxxxxh  *1	Displays the number of hours that the backlight has been on.

*1 “xxxxxx” indicates up to 262800 hours (about 30 years). [OVER] is indicated when the number of hours is 262800 or higher.

48