Panasonic BT-LH2170E, BT-LH2170P AUDIO, Submenu, Setting, CH INFO, POINT LINE, (continued), Description, SPEAKER OUT, LEVEL METER, INPUT SELECT, GROUP SELECT, CH SELECT *7, HEAD ROOM *8

*1

*2 *3 *4 *5 *6 *7

Main Menu  (continued)

AUDIO

Sets the audio output (a speaker, headphones) and the audio volume bar meter.

				Underlined values indicate factory defaults.
Submenu		Setting		Description
INPUT SELECT	AUTO		Selects speaker, headphones output and audio volume bar meter display.
	ANALOG		[AUTO]	<INPUT SELECT> button on the front panel (→page 12)
				When SDI input line is selected:
				Embedded audio (SDI terminal)
				<INPUT SELECT> button on the front panel (→page 12)
				When HDMI input line is selected:
				Embedded audio (HDMI terminal)
				When an input line other than SDI1, SDI2 or HDMI are selected
				with the <INPUT SELECT> button (→page 12) on the front panel:
				Analog (AUDIO input terminal)
			[ANALOG]	Analog (AUDIO input terminal)
GROUP SELECT	CH1 to CH8		Group selection of 16-channel audio using SDI signals.
	CH9 to CH16		[CH1 to CH8] Displays channel 1 to 8.
			[CH9 to CH16] Displays channel 9 to 16.
SELECT L  *1 *2 *3 *4	CH1 to CH16		Selects embedded audio channels to output to the speaker or headphones
	(Factory default: CH1)		(L).
SELECT R  *1 *4 *5 *6	CH1 to CH16		Selects embedded audio channels to output to the speaker or headphones
	(Factory default: CH2)		(R).
SPEAKER OUT	MIX		Selects SPEAKER OUT status.
	L		[MIX] Outputs a combination of audio selected with [SELECT L] and
	R		[SELECT R].
			[L] Outputs the sound selected with [SELECT L].
			[R]Outputs the sound selected with [SELECT R].
LEVEL METER	OFF		Selects whether or not to display the audio volume bar meter. (→page 18)
	ON
CH SELECT  *7	2CH		Selects number of audio level meter channels.
	4CH		• 16 channels cannot be displayed simultaneously.
	8CH
POINT LINE	OFF		Turns the 0 dB line (reference point) indication on the meter on and off.
	ON
CH INFO.	OFF		Switches the channel displayed on the meter on and off.
	ON
HEAD ROOM *8	12dB		Sets the display position of the reference point in the meter display.
	18dB	*9
	20dB	*10

When [CH5] to [CH16] is selected during SDI SD signal input: Switching is performed as follows:

[CH5]/[CH9]/[CH13]→[CH1], [CH6]/[CH10]/[CH14]→[CH2], [CH7]/[CH11]/[CH15]→[CH3], [CH8]/[CH12]/[CH16]→[CH4] (The menu settings remain as is.)

During HDMI signal input, CH1 audio is output regardless of the menu setting. When analog audio is selected, L audio is output regardless of the menu setting.

A [SELECT L], [SELECT R] channel display setting is reflected directly after a [GROUP SELECT] change is confirmed. During HDMI signal input, CH2 audio is output regardless of the menu setting.

When analog audio is selected, R audio is output regardless of the menu setting.

During HDMI signal or analog signal input, [2CH] is displayed regardless of the menu settings. During SD-SDI signal input, the display becomes [4CH] even if [8CH] is selected in the menu.

*8 During analog signal input, the reference point is 20 dB regardless of menu setting. *9 Factory default setting for the BT-LH2170E.

*10Factory default setting for the BT-LH2170P.

45