Main Menu (continued)
SYSTEM CONFIG
|
|
|
|
|
|
| Underlined values indicate factory defaults. |
Submenu | Setting |
|
|
| Description | ||
SUB WINDOW | FULL |
| Selects | ||||
| PART |
| [FULL] | Reduces the entire input signal screen and turns it into two screens that are | |||
|
|
|
|
| displayed side by side. |
| |
|
|
| [PART] | Removes the center portion of | the input signal screen and turns it into two | ||
|
|
|
|
| screens that are placed side by side. (The center portion is displayed at its | ||
|
|
|
|
| original size) |
|
|
| MENU POSITION | CENTER | Positions the |
| ||||
| LT |
| [CENTER] Center of screen |
| |||
| RT |
| [LT] | Top left | [RT]Top right |
| |
| RB |
| [RB] | Bottom right | [LB] Bottom left |
| |
| LB |
|
|
|
|
|
|
| STATUS DISPLAY | OFF |
| Determines how operating status (→page 16) is displayed. | ||||
| 3SEC OFF | [OFF] |
| Not displayed. |
| ||
| CONTINUE | [3SEC OFF] Displayed for approx.3 seconds after a status change. *1 | |||||
|
|
| [CONTINUE] Displayed at all times. |
| |||
| INPUT NAME | ▼ |
| Changes the names of displayed input terminals in status display screens. *2 | ||||
| SETUP |
|
|
|
|
|
|
|
| SETUP LOAD | FACTORY | Loads saved factory defaults ([FACTORY]) or user data ([USER1] to [USER5]).(→page 22) | |||||
| USER1 | *3 | After loading user data, the screen displays the signal selected before user data was | ||||
| USER2 | *3 | loaded. |
|
|
| |
| USER3 | *3 |
|
|
|
|
|
| USER4 | *3 |
|
|
|
|
|
| USER5 | *3 |
|
|
|
|
|
| SETUP SAVE | USER1 |
| Up to 5 sets of user data can be saved.(→page 22) | ||||
| USER2 |
| Adjustment values made with the rotary knob <PICTURE> and menu settings, except | ||||
| USER3 |
| [SETUP SAVE]/[SETUP LOAD] can be saved. | ||||
| USER4 |
|
|
|
|
|
|
| USER5 |
|
|
|
|
|
|
| POWER ON SETUP | LAST |
| Selects the settings used when the power is turned on. | ||||
| FACTORY | [LAST] | Starts in the mode used when the power was last turned off. | ||||
| USER1 |
| [FACTORY] Starts up using the factory defaults. | ||||
| USER2 |
| [USER1] to [USER5] Starts up using USER registered settings. | ||||
| USER3 |
|
|
|
|
|
|
| USER4 |
|
|
|
|
|
|
| USER5 |
|
|
|
|
|
|
| COLOR SPACE | Sets the studio standard color shade. |
| |||||
| EBU *5 |
|
|
|
|
|
|
|
|
|
|
|
| ||
| POWER DOWN | OFF |
| Determines whether or not the power will be turned off (powered down) when there is no | ||||
| ON |
| signal input and the monitor has been idle for a certain period of time. | ||||
|
|
| [OFF] The monitor is not powered down. | [ON] The monitor is powered down. | |||
| POWER SAVE | OFF |
| Sets the power save mode |
| |||
| MODE | ON |
| [OFF] POWER SAVE MODE is not engaged. | ||||
|
|
| [ON] | The backlight dims when no signal ([NO SIGNAL]) is input for approx.60 seconds | |||
|
|
|
| or longer. Signal input or menu operation will return the backlight to its normal | |||
|
|
|
| brightness. |
|
| |
| CALIBRATION | ▼ |
| Connect a | ||||
|
|
| also restores the calibration data to factory defaults.(→pages 32 to 33) | ||||
*1 In PIXEL TO PIXEL and 3D assist mode, the [3SEC OFF] setting has the same effect as [CONTINUE].
*2 Up to 9 characters can be entered for this monitor. Only alphabetic characters (English), numeric characters and symbols can be used.
*3 [USER1] to [USER 5] and [FACTORY] have the same factory defaults. *4 Factory default setting for the
*5 Factory default setting for the
30