Main Menu  (continued)

„„ZEBRA

The stripes of the ZEBRA function appear over an image (in the viewfinder) to help you adjust the aperture of a camera lens for optimum exposure and easily find the areas of an image that are overexposed and turn white (where clipping occurs).

Press any of the <FUNCTION1> to <FUNCTION5> (→page 12) buttons to which [ZEBRA LEVEL] is assigned or select [ZEBRA] in the [VIDEO CONFIG] menu to set [INT.MIN.], [INT.MAX.], [EXT.MIN.] and [EXT.MAX] levels.

Press the <FUNCTION1> to <FUNCTION5> button to which the [ZEBRA] function has been assigned to turn the ZEBRA function on.

[INT.MIN.] and [INT.MAX.] show ZEBRA stripes for areas that are within menu set values. [EXT.MIN.] and [EXT.MAX.] show ZEBRA stripes for areas that are outside menu set values.

[INT.MIN.] and [INT.MAX.] ZEBRA

[EXT.MIN.] and [EXT.MAX.] ZEBRA

pattern

pattern

„„Y MAP

The Y MAP function makes it easy to visually confirm overall screen brightness (luminance level map).

Press the <FUNCTION1> to <FUNCTION5> (→page 12) button to which the [Y MAP] function has been assigned to turn it on. Turning on this function displays a simplified chart at the left side of the screen.

• Simplified chart details (The numbers in the simplified chart indicates Y signal levels.)

>100 %

 

 

 

 

 

 

 

 

 

Red

 

 

 

 

100 %

 

 

 

 

 

 

100 %

 

 

 

 

 

 

 

95 %

 

 

 

Dark Orange

 

 

 

 

 

 

 

Orange

 

 

 

 

 

 

 

 

 

 

 

 

85 %

Yellow

75% 75 % Light Gray

60 %

 

 

 

 

 

 

 

 

 

 

 

Gray

 

 

 

50 %

40 %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dark Gray

 

 

 

25 %

 

 

 

 

 

 

 

20 %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blue

 

 

 

 

10 %

 

 

 

 

 

 

 

 

 

 

Dark Blue

 

 

 

 

0 %

 

 

 

 

 

 

0 %

 

 

 

Magenta

 

 

 

<0 %

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<Note>

•When [HALF] or [BLACK] is selected in [BACK] under the [MARKER] menu, the simplified chart indicates a signal level of 50 % or may not be displayed at all.

•When the Y MAP function is on, [BLACK MODE] is turned off.

40