Panasonic DMC-LX100 owner manual 130, → Custom → Peaking

Adjusting the focus and brightness (exposure)

Taking pictures with Manual Focus

Enabling/disabling [Peaking] to add color to the portions of the image that are in focus

→ [Custom] → [Peaking]

●●[Peaking] functions during Manual Focus or when you are adjusting focus manually using [AF+MF].

[ON]	Color is added to the portions of the image that are in focus.
[OFF]	The portions of the image that are in focus are not displayed.
		The detection level for in-focus portions is set.
	[Detect	When [HIGH] is set, portions to be highlighted are reduced, allowing you to
		achieve a more precise focus.
	Level]
		Settings: [HIGH] / [LOW]
			••The detection level setting does not affect the focus range.
		Sets the highlighting color used for [Peaking].
		Settings
		The available color settings differ depending on the setting of [Detect
[SET]		Level].
		Changing the [Detect Level] setting also changes the [Display Color]
	[Display		setting as follows.
	Color]
			[Detect Level]		[HIGH]		[LOW]
			[Display Color]	[	] (Light blue)	[	] (Blue)
				[	] (Yellow)	[	] (Orange)
				[	] (Green)	[	] (White)

●●	] ([Detect Level]: [HIGH]) or [	] ([Detect Level]:
When [Peaking] is set to [ON], [

[LOW]) will be displayed.

●●When [Fn Button Set] (→37) in the [Custom] menu is set to [Peaking], you can switch the setting in the following order every time the assigned function button is pressed: [ON] ([Detect Level]: [LOW]) → [ON] ([Detect Level]: [HIGH]) → [OFF].

●●Since portions with clear outlines on the screen are highlighted as in-focus portions, portions to be highlighted vary depending on the recording conditions.

●●The color used for highlighting does not affect recorded pictures.

Not available in the following case:

●●[Peaking] does not function in the following case:

••When the picture effect (Filter) is set ([Rough Monochrome])

130

SQW0021