Panasonic DMC-LX100 233, Connecting to a smartphone using NFC function, Compatible models

Wi-Fi

Operating the camera by connecting it to a smartphone

Connecting to a smartphone using NFC function

Using the NFC (Near Field Communication) function, the camera and a smartphone can easily exchange the information needed to establish a Wi-Fi connection.

Compatible models:

This function can be used with NFC compatible devices with Android (2.3.3 or above). (Not available in certain models)

••See the operating instructions of your NFC-compatible smartphone for more information about smartphone operation and settings.

Preparations (On the camera)

••Set [NFC Operation] to [ON] (→272) (On your smartphone)

••Check if your smartphone is a compatible model

••Set Wi-Fi function to “ON”

••Install “Image App” in advance (→228)

1Start “Image App” on your smartphone

2While the [  ] is displayed on the connection screen of the “Image App”, hold the smartphone close to the camera

3Use to select [Yes] and press [MENU/SET]

4Hold the smartphone close to this area of the unit again

••When the connection is complete, live images captured by the camera will be displayed on your smartphone.

••It may take some time to complete the connection.

••Connected smartphones are registered to this unit.

••From the next time and on, you can connect by performing steps 1 and 2.

Hold the smartphone

close to this area

(within 5 mm (0.20 inch))

233

SQW0021