Panasonic DMC-LX100 owner manual 277, Viewing on TV screen

Connecting with other devices

Viewing on TV screen

■■To connect with an HDMI micro cable ●●Check the [HDMI Mode]. (→48)

●●To play back 24p motion pictures, set [HDMI Mode] to [AUTO]. Otherwise, the picture is not output at 24 frames per second.

●●Bars may appear at the sides or at the top and bottom of the screen, depending on the aspect ratio setting.

●●Cables that do not comply with HDMI standards will not work.

●●When an HDMI micro cable is connected, pictures are not displayed on the screen.

●●HDMI output will be canceled if a USB connection cable (supplied) is connected simultaneously. ●●When the AV cable (optional) and HDMI micro cable are connected at the same time, no picture

is output from the AV cable.

●●Pictures may be momentarily distorted immediately after commencing playback or pausing on certain televisions.

●●Audio output is stereo.

●●Read the operating instructions for the TV.

■■To connect with an AV cable (optional) ●●Check the [TV Aspect]. (→47)

●●Always use a genuine Panasonic AV cable (DMW-AVC1: optional). ●●Pictures rotated to portrait may be blurred slightly.

●●Change picture mode settings on TV if aspect ratios are not displayed correctly on widescreen or high-definition televisions.

●●The viewfinder display cannot be used. ●●Read the operating instructions for the TV.

The recorded pictures can be played back on a TV with an SD Memory Card slot

●●Proper playback (aspect ratio) will be dependent on the TV used for viewing.

●●The file format of the motion pictures that can be played back differs depending on the TV model.

●●You may not be able to play back panorama pictures. Also you cannot perform automatic scrolling playback of panorama pictures.

●●For cards compatible with playback, refer to the operating instructions of the TV.

277

SQW0021